Questions and tiling advice in the Tiling Tools - Tiling Tools Forum for all tool related discussions. Find the best tiling tool suppliers, and the quickest tile cutters for all tile types. Some tool brands include Rubi, Sigma, Vitrex, Big Clinker, Plasplugs, Fein. Most do tiling tools including tile cutters. Find advice, guides, how-to material, videos, chat and discussion all in one place @ TilersForums.com.

Some popular forums: UK Tiling Forum | Tiling Advice - Tile Adhesives Advice | Which Tile Adhesive to use - Tiling Tools Advice | Best Tile Cutters

Normal Threads
S
My bought in april Dewalt Wet saw today became a serious flippin hazard. I was about to cut a peice of Marble when i felt a shock go up my arm. At first i thought it was just static so i turned it off and on, stamped my feet away from any water (to get rid of any static lol) and touched the...
Replies
26
Views
7K
C
My Husqvarna TS-230F wet saw has suddenly started being a lot more noisy when running - could it be bearing nose on the motor? Has anyone else noticed this? Cheers
Replies
11
Views
943
P
Hi everyone, I've got a rubi dw 200 lp wet saw with a Marxist blade for cutting marble and granite. I've tried to cut a stone tile which is 500mm by 500mm but the saw does not cut in a straight line. I'll be very grateful if someone can advise me on this.
Replies
14
Views
18K
Spectra floor laser has finally given up. So in need of a new one, Any good quality lasers out there ?
Replies
2
Views
395
  • Question
Hi, Is anyone using a Rubi DCX-250 expert 1250 bridge saw? I'm trying to find the total length of the saw table to ensure it fits in the van prior to purchase. Trying on google but it's telling me packaged length is same as cut length...1250...which cannot be correct. Have a berlingo van and...
Replies
0
Views
139
Hi folks Anyone using this chop saw for tile trims.
Replies
4
Views
1K
Steve Smith
S
I've just got the new Ebauer paddle mixer, it's really good especially for £70. I was thinking about buying a cordless mixer, I'm still waiting Bosch! 1600w a big step up in power from my Sparky 1060w. More ergonomic handle design and higher on the mixer so you don't have to bend down as much...
Replies
2
Views
509
Hi, apologies if this has already been covered before but I couldn't find anything in the forum searches. ok so I'm an aerospace engineer by trade and carpenter by hobby, so I'm pretty capable at making things and have set my hand to refurbishing my en suite into a wet room. the plumbing...
Replies
3
Views
2K
Hi all. I hope you are well. I am in the process of doing my ensuite and looking at getting some polishing pads my 5 inch dewalt xr grinder. Also some diamond holesaw cutters for the grinder. Never done it that way before but heard it is great. I think I maybe need an adaptor. Any advice would...
Replies
2
Views
569
This is ultrathin membrane. Anyone tried it as decoupling membrane? Any thoughts?
Replies
5
Views
299
Before I give up and bin my Mixer I would like to ask if it is possible to buy spares. I am surprised I cannot even find a mention of spares on their site. The armature needs replacing. Any help would be appreciated. Cheers.
Replies
13
Views
3K
Gabriel
G
D
Client wanted to drill a hole into a pyrex dish. Can it be done? Well using 365Drills PORSADRILL and following our guidance the answer is yes. Here is the video: And as you can see from the image above of PYREX the answer is yes you can safely drill pyrex glass with 365-Drills...
Replies
4
Views
10K
Adam of WV
A
Hi all, haven't been here for long time , but thought someone might be interested in my homemade pin leveler. I got a one off job to latex a couple of garage floors and didn't fancy spending £80+ on a decent pin leveler. Used it today and it certainly did the job fine for what I needed. Anyway...
Replies
1
Views
390
What is the best size of a van for a tiler? Presumably, a smaller van, like Ford Transit Connect, should be sufficient. However, often you need plasterboards / backer boards. In such a case you would rely on delivery or use smaller boards. Please share your thoughts.
Replies
1
Views
457
Do any of you use a tile vibration tool when laying the tiles? Are they good? What make is the tool? I haven't seen any versions by the main tool manufacturers (Makita, Dewalt etc.) Cheers
Replies
3
Views
1K
M
Hi All Been looking into buying a rotozip or bosch gtr30 but I'm a bit unsure which one to go for. I'm wanting the straight edge guide which is supplied in the rotozip kit but looks like its not supplied with the bosch, i'm guessing the bosch could be used with my own straight edge as a guide...
Replies
7
Views
5K
Geoff Burton
G
I
I'm thinking of investing in one for peace of mind on new slabs. Can anyone recommend a particular model or a link or two. Thanks Bri
Replies
40
Views
29K
Hi Has any folk got this mixer, whats it like for mixing across the day and can mix plasters as well as tile addy. Cheers
Replies
7
Views
3K
patrick
P
  • Question
What's your question? Pictures can be added. Wet saw Hi all , best wet saw for the money to take big tiles to ! I know of the dewalt is this still the case ! Thanks in advance 👍🏻
Replies
3
Views
672
Hi all, I've brought an Evolution R210CMS mitre saw for cutting tile trims. It comes with a T20 tct multipurpose blade. The issue I'm having is when I cut steel trim, it keeps kicking back and bending the trim. My question is, do I need to buy the T68 blade for cutting finer metals? Or is it...
Replies
1
Views
694
phil501
P
Hi, I've been thinking about corded a water-fed angle grinder and wondered if anyone could recommend one? Also are these dust-free enough for use indoors? many thanks in advance.
Replies
1
Views
903
O
I finally bought one and I've been looking at them for years. You see; I like tools and especially really nice, well made tools. But I didn't think that I could justify spending the best part of £1000 on what effectively appeared to be just a small table top wet saw. So for the past several...
Replies
11
Views
9K
Kris K
K
Anyone have this laser level or heard any reports about them ? Huepar 3D Floor Laser Level Cross Line 3X 360 Self Leveling Green Beam Three-Plane Leveling, Alignment and Tiling Floor Laser, 1X 360 Vertical + 2X 360 Horizontal Line with Remote Control (503DG)
Replies
0
Views
1K
B
What exactly is the theory behind a washboy,this site is the first time I've heard of one.I can see the grout sinking to the bottom,but I can't see it keeping the water clean for any extraordinary amount of time,are they popular in England? Mike
Replies
14
Views
8K
The Day Clan
T
New product invention Tile Profile is one of the best for setting firms distance to start tiling any size at any height. The mathematical system lets you set your line to any length depending on the kit. Takes large and heavy tiles with ease.
Replies
0
Views
160
I have not yet found a suitable new tile cutter, the IQ dry cutter is out of stock and then the Sigma 9p is no longer available and dont like the look of the new ones they have released. So need to replace the Briccolina blade but having trouble finding something for Porcelain, the only blades I...
Replies
1
Views
463
K
I was just wondering if anyone has the sigma jolly edge, or used one? I brought one around a year ago. It worked very well for about 7 mitres on a 60/60 porcelain tile. All of a sudden it started to run off the mitre edge leaving it thick. I’ve read the set up instructions and have it set...
Replies
19
Views
12K
Hello, i do dry pack screeding and want to ask if there is a Vibrating screed bar for this job.thank you
Replies
0
Views
309
Anyone gone over to the 40v makita stuff yet? I need to replace my combi.......and was looking at the 40v Makita stuff, but chuffing hell......it’s expensive
Replies
0
Views
376
https://www.oxtools.co.uk/about-us Seems to have a name that rings a bell. And does drills. And says they were leading in 1992. Food for thought? or am I late in the game?
Replies
2
Views
442
Hi need some advice. I can't seem to locate a switch replacement for this model. Do you think the Battipav Replacement On/Off Switch could be fitted on a Vitrex
Replies
0
Views
392
Is this wet cutter discontinued? cant seem to find one with a stand anywhere?
Replies
3
Views
1K
I
I received one of these last week, as I have a job this week that needs a lot of mitring as the clients do not want any trim. Just so I'm not ruining any expensive tiles, I thought I'd have a little practice before unleashing it on a paid job! I tried it on a polished porcelain, a low grade...
Replies
9
Views
6K
https://www.sakertool.co.uk/pages/saker-contour-gauge-profile-tool1 Saker Contour Gauge can duplicate any shape instantly. This profile gauge creates an instant template for curved and odd shaped profiles simply and easily. Never transfer profiles to paper or cardboard again. The contour gauge...
Replies
1
Views
1K
Hi can anyone advise me on how to fit a 22mm bore blade on to my vitrex 750 wet cutter? I’ve been told that you can change something around on it but not quite sure. Many thanks
Replies
1
Views
332
Hi all, Im a DIYer doing a lot of work on an old house we are f restoring. I have put down a lot of riven slate downstairs and bought a Rubi DW-250 wet saw for it. Its done a great job. Got more slate to do in the bathroom, but also going to have 50m2 or so of porcelain to do. The question...
Replies
1
Views
660
Pro Tiler Tools is still open as usual for the time being. Our team is made of up tiling experts who are at the end of the phone to answer any of your questions. Give us a call on 01604 859800 and we'll be happy to help. CATEGORIES CHOOSE FROM OUR HUGE SELECTION REFURBISHED MACHINES & CLEARANCE...
Replies
1
Views
645
I need to replace my wet saw blade and I'm looking for a reasonably priced blade that will handle all types of tile . It's a 200mm diameter 22mm bore. Thanks all
Replies
1
Views
404
Post a New Thread / Question
Tiling Courses
Workwear for Tradesmen
Mapei Tile Adhesive and Grout
uHeat
The Wetroom Store for all Wetroom Installations
Nicobond Tile Adhesives and Grout

Latest 10

Top