O
Old Mod
It will still react with dry concrete, only a little slower.How many problems do you have ..
Do, as I did,
place, a concrete panel 6mm. (Without adhesive).
Tape on junctions.
And use epoxy adhesive.
that's no good?
follow_along_with_video_below_to_see_how_to_install_our_site_as_web_app
Note: this_feature_currently_may_not_be_available_in_some_browsers
Discuss Retro fit ufh & Hydrogen gas causes floor failure. in the Canada Tile Advice area at TilersForums.com.
It will still react with dry concrete, only a little slower.How many problems do you have ..
Do, as I did,
place, a concrete panel 6mm. (Without adhesive).
Tape on junctions.
And use epoxy adhesive.
that's no good?
Covering the whole system with liquid dpm Harry?What about an epoxy dpm as a barrier?
no afhesive from panel, epoxy for exaggerateNo adhesive from panel to substrate?
Adhesive from panel to tile, epoxy?
that could be a whole different problem Antonio, we/I try to avoid tiling floating floors.
Then also avoid aluminum heating.that could be a whole different problem Antonio, we/I try to avoid tiling floating floors.
no afhesive from panel, epoxy for exaggerate
why would people us this system when there is so many others out there which should be less problematic to tile onto.
Exaggerate, say, a surplus, an additional guarantee.Exaggerate no compry Antonio.
ah?Now you have photos Antonio, you can remember how you completed it?
Reply to Retro fit ufh & Hydrogen gas causes floor failure. in the Canada Tile Advice area at TilersForums.com