follow_along_with_video_below_to_see_how_to_install_our_site_as_web_app
Note: this_feature_currently_may_not_be_available_in_some_browsers
Discuss Retro fit ufh & Hydrogen gas causes floor failure. in the Canada Tile Advice area at TilersForums.com.
That is an option Mark, yes, but you MUST prime prior to levelling.I've never come across one of these ufh systems.. should you slc over the pipes first like we would normally?
That is an option Mark, yes, but you MUST prime prior to levelling.
On that stuff two coasts of Multi Surface Primer (treat the aluminium as a tile surface) would be appropriate?That is an option Mark, yes, but you MUST prime prior to levelling.
Well that's a question we have asked and are waiting a response on Mark.Even if you use a gypsum based leveler?
I'm not going to generalise Mark as this is such a delicate system when all said and done, so check with the manufacturer that it meets the requirements.On that stuff two coasts of Multi Surface Primer (treat the aluminium as a tile surface) would be appropriate?
Reply to Retro fit ufh & Hydrogen gas causes floor failure. in the Canada Tile Advice area at TilersForums.com