combi,drill driver or impact.

[rich83]

Right for sake of costs and space I would like to know which would be best ,I'm aware it would be good to have two of these but would little impact drill be ok...easier to manage,and they seem to have good torque. Cheers in advance, considering tool investment in near future,and just want advising on you're opinions ,cheers....its supposed to say combi,predictive strikes again

 

[Ian]

Impact drivers are only good for screwing, if you want an all rounder, get a combi drill.

 

[rich83]

Afraid you'd say that.are they OK for boarding walls.floors,

 

[Qwerty]

Afraid you'd say that.are they OK for boarding walls.floors,

I've never had any issues mate

 

[Ian]

Afraid you'd say that.are they OK for boarding walls.floors,

Spot on for boarding walls/floors but, if you only want one to do all drilling and screwing you'll need a combi drill. They have torque settings on them anyway so you don't pull screws through plasterboards.

 

[rich83]

So you use impact,have you also got combi. And if so how often is combi needed

 

[Ian]

So you use impact,have you also got combi. And if so how often is combi needed

I have a pair, impact driver and a combi drill. Very handy when fitting 12mm Hardibackers to stud walls as they (IMO) need piloting before screwing, I have a 4mm bit in the combi and then use the impactor to screw them up.

 

[rich83]

Thanks very much,very helpful.

 

[rich83]

Oh sorry 1 more thing is 14.4 OK,or is 18v best ...

 

[Qwerty]

18v

 

[rich83]

The more expensive one,why did I ask... Cheers

 

[widler]

http://bit.ly/1iN3zSo

I have this, used them for a year with no problems, good drills for the money

 

[rich83]

Looks good price,seen On s-fix,a 18v combi & impact (dewalt)1.5 batteries for 240. Way to much choice,in no rush so I'll keep eye on deals.cheers for reply.

 

[High Peak Tiling]

I have these:
One for hole drilling
One for general stuff
Impact for stud walls etc
And also have a small screwdriver for sockets

 

[prceramics]

i could not imagine life without my Makita impact driver

 

[On one]

I got an 18v bare body Makita impact driver for £80 a couple of months ago,should have done it years ago!

 

[prceramics]

Animals ain't they

 

[Dougs Third Go]

[DLMURL="http://www.powertoolworld.co.uk/bosch-gsb18-v-li-18v-cordless-combi-drill-2-x-3ah-li-ion-in-a-portaled-l-boxx1.html?gclid=CLSt0u7RyLwCFbLJtAodQHAAKw"]Bosch GSB 18 V-Li 2 x 3Ah Li-ion Cordless Combi Drill 18V Li-ion | Bosch GSB 18 VLI| V-Li[/DLMURL]
this is the one I have, great bit of kit imo.