Can anyone see anything wrong with the way builder left the gully - TilersForums.com

[Old Mod]

You think you got problems?
And this is supposed to be for thin tile haha



And you can’t do your shower without envelope cuts.
Not possible.
Unless it’s mosaic, or gulley goes full width.

 

[Balloo]

You think you got problems?
And this is supposed to be for thin tile haha

View attachment 107262 View attachment 107263 View attachment 107264

And you can’t do your shower without envelope cuts.
Not possible.
Unless it’s mosaic, or gulley goes full width.

Customer is happy with a couple of envelope cut but ill need a lot of them

 

[Balloo]

You think you got problems?
And this is supposed to be for thin tile haha

View attachment 107262 View attachment 107263 View attachment 107264

And you can’t do your shower without envelope cuts.
Not possible.
Unless it’s mosaic, or gulley goes full width.

Well at least you can take it out and fix it

 

[Pauly tiler]

It'll be ok, you use waterproof adhesive and grout don't you?
I can do that, gis a job, ( probably too long ago for some to get)

 

[Wayne Brown]

Think this is what your working with its very unlikely you can swap for a grate type gully the problem you have is enveloping wont work very well if at all as you can see if you draw it out

 

[Pauly tiler]

Good Spot there fella.
The reason it look wrong regarding the install is because the sequencing is off, see the link.

Geberit CleanLine

www.youtube.com

 

[Wayne Brown]

Nice one Paul obviously not going to work for Balloo its not installed correctly as you have now clearly demonstrated. Cheers kop

 

[Dumbo]

Obviously the key word is builder in the thread title .

 

[Italy]

december jotm

www.tilersforums.com

bathroom planks

MOSAIC

www.tilersforums.com

it's the same system I used in the photos.
the tiler must install it, at the time of installation
of the tiles.

 

[Flintstone]

I refuse to tile anything other than a pre formed tray !