M
Midlandceramics
Still no Ansa to my original question ? ?
Fibre slc thickness on wet ufh
G
Gazzer
Cant answer because original question makes no sense to me.
M
Midlandceramics
Fair enough
G
Gazzer
No offence but what is you need to know ?
M
Midlandceramics
Fibre slc thickness on wet ufh
What kind of depth of fibre slc on top of wet ufh pipes
What kind of depth of fibre slc on top of wet ufh pipes
G
Gazzer
ARE YOU ASKING WHAT IS THE MAXIMUM OR MINIMUM OR WHAT IS NORMAL ETC ??
Oopps cap lock on
Oopps cap lock on
M
Midlandceramics
I would of thort min 3mm !! Normal for this app
M
Midlandceramics
Sorry mate ! That doesn't read well !! The normal depth for this app
G
Gazzer
Are you putting it over exposed pipework ?
I hate these UFH systems and in the past I have gone over with Ditra.
I hate these UFH systems and in the past I have gone over with Ditra.
M
Midlandceramics
Yes deffo going on with Ditra it's 12mm trav ! But first will prima grip bond the deflective cover which holds the pipes and fibre slc on to that then ditra 44m
M
Midlandceramics
Just wonderd if any one knows the rec depth of the fibre slc on this app
surely you just read the back of the bag.....normal thickness is 3mm to 50mm...or i'm I missing summit..
M
Midlandceramics
Yeh of course it does ! Just wondering how thick anyone else has put this down on this ufh system !!. Jesus
alright keep your pants on......don't think anyone has the slightest idea what your on about..!!!
im out anyway ....leave it to someone eles !!
im out anyway ....leave it to someone eles !!
Last edited:
G
Gazzer
As I said earlier the original post was vague but surely the idea of SLC is to put as much on as is needed....??
T
trevortine
I recently viewed one of these and knocked it back due to the fact the boards were just laid on top of subfloor and were rocking around all over the shop. I reccomened they be screwed down and at least 10mm slc over top then ditra. The new bal fibre base is stable at 3mm where as weber floor flex needs 10mm. So to answer the original question at least 10mm screed, not forgetting to prime boards first with pr360.
M
Midlandceramics
Yes thanks ! Someone who knows the score .. Not many have seen this system never mind put trav on top.. Yeh will use top grade primer !! Started to think I am going mad !!ha ha
I
Ian
Does the UFH system look like this?
M
Midlandceramics
Similar ! Is that on like on a Marmox board or is that the primer on the surface !!!! This stuff is hdfoam comp with a alliminum deflector on it . This is the link mate have a look !! Installing the JG Overfit System - YouTube
M
Midlandceramics
How was this fixed to sub floor !!
I
Ian
It was fixed to the concrete with a brown contact adhesive, the green is indeed primer, it's F.Ball P131.
M
Midlandceramics
Fantastic ! Now for on top ! What was the tile And was it ditra matted over the screed !! Thanks
Looks like the video recommends cement board like I posted earlier.
thog looking at th above picture. Self levelling along with a good primer will cut the depth down by 20mm
I
Ian
Ditra then travertine
Annoyingly, I don't have a pic of the finished floor! I was there again today and the floor is in perfect condition still, it's only been down a couple of months but, good signs.
M
Midlandceramics
Nice one bri . Shame you got no more pics !! Was it a fibre slc , I'm going to use renavation
I
Ian
I'll get some more pics in a couple of weeks when I'm back there, there is a hot tub on the floor now! The SLC is weber floor flex, so yes, a fibre based one.
I
IHB
Bri - Who laid those slabs?
M
Midlandceramics
This is spot on thanks look forward to the pics !! Finally I found someone with the same app from sub floor to trav !! Just out of intreast is the ufh the jg speed fit overlay system !! If not it looks very similar !! Thanks again bri ....regards . Jay - midland premier tiling
M
Midlandceramics
I'd take no notice of there instalation methods mate !! They haven't got a clue . I was using the video to show the product !! I've spoke to there tech 3 times and there rep and all don't know what there on about !
There are similar tiling threads here
Featured Threads
- F
- W
-
- I
-
-
-
-