Tile cutters needed for all of today’s tiles

[Blunt Tool]

Sold my last Rubi, TX1200 last month and purchased the Montolit Flashline Evo rail system that goes up to 3200mm ( no chance I’m ever doing them!! ). I bought it to replace the Rubi as it can sit in my little Combo and is nice and light compared to the Rubi (about 4 stone lighter)
So now I have the Sigma 3L3M up-to 550mm which is handy for small bathrooms, kitchens etc
The Sigma 3C3M up-to 725mm main cutter
And the Montolit Flashline Evo up-to 3600mm which I used lately on 1000mm porcelain 10mm thick and cut perfect!
I do have a Flex wet saw with rails which now more or less replaces my big Rubi wet saw so probably sell that now also.
I think I more or less have everything covered now, always grinders for anything else so think I’m set now for a long time?
So what’s everyone’s tile cutting set up, what have you got to get you from Metros to large format porcelain?

 

[Andy Allen]

I got 2 Sigma's that came off Noah's ark...( Had them well over 20 years)..
One will cut up to 333mm, one up to 600mm
Anything bigger.......I use a grinder or my Rubi nd200....

 

[Old Mod]

Where do I start? Haha 😀

 

[Blunt Tool]

[

I got 2 Sigma's that came off Noah's ark...( Had them well over 20 years)..
One will cut up to 333mm, one up to 600mm
Anything bigger.......I use a grinder or my Rubi nd200....

i only updated the Sigmas lately Andy as was struggling with the pull so both push now

 

[Andy Allen]

My two cutters, ....done me proud over the years...

 

[Andy Allen]

[

i only updated the Sigmas lately Andy as was struggling with the pull so both push now

That's how the girls use them....😀😀

 

[Tony_C]

Sigma 2G 370mm, 3C3M 725mm and 3E4M 1270mm
Dewalt D24000 and a portable vitrex cutter

I'm definitely done...for now🙄

 

[Old Mod]

Dewalt D24000 and a portable vitrex cutter

I'm definitely done...for now🙄

Yes you were Anthony! Haha 😀

 

[Tony_C]

View attachment 108429

My two cutters, ....done me proud over the years...

These things need some loving Andy 😛

 

[Andy Allen]

These things need some loving Andy 😛

Noooo, it's the adhesive that's holding them together...😵

 

[Bill]

My Rubi TS 40 is still a beast ......... and my Cintride scribe.....

 

[Blunt Tool]

My Rubi TS 40 is still a beast ......... and my Cintride scribe.....

Where’s your trusted advisor tag Tom?

 

[Old Mod]

Where’s your trusted advisor tag Tom?

Technical glitch currently, when it’s sorted I can get it reinstated, unless @Dan is able to do it now.

 

[Dan]

Sorted. Apologies. It was my fault but it wasn't me that removed it I promise. 🙂

 

[Flintstone]

Sigma 7f for the small stuff
Sigma 3g3m
Sigma 3c3m
Sigma 3e4m

That's enough to see me through !

 

[Blunt Tool]

Just a side note, I’ve found an alternative online supplier on eBay that has better prices than the usual non sponsors, type in Sigma and you’ll find it

 

[Dan]

You can link to it mate as long as you're not getting kick backs or anything for it.

A good deal is a good deal.

 

[Dan]

Edit: is this it? Sigma 3b2 - Tile Cutter - 65 Cm Cutting Length for sale online | eBay - https://www.ebay.co.uk/p/Sigma-3b2-Tile-Cutter-65-Cm-Cutting-Length/1665111158

 

[Unused Account 1]

Just used to my rubis,nd200 had for 15 years ,the bed solid ,not like the new ones ,anyone got one of the newish bigger rubis ,got told it snaps 20 mm porcelain

 

[Blunt Tool]

Edit: is this it? Sigma 3b2 - Tile Cutter - 65 Cm Cutting Length for sale online | eBay - https://www.ebay.co.uk/p/Sigma-3b2-Tile-Cutter-65-Cm-Cutting-Length/1665111158

That’s it Dan, he usually ships direct from Italy

 

[Dan]

Link away if you find good deals mate. Sounds like a bargain. Might not be around forever as a result but that's fine as long as he fulfills his orders ey

 

[Albert]

Just used to my rubis,nd200 had for 15 years ,the bed solid ,not like the new ones ,anyone got one of the newish bigger rubis ,got told it snaps 20 mm porcelain

I have the tz it cuts 20mm with ease

 

[Unused Account 1]

Thanks albert what size did you get

 

[Albert]

Thanks albert what size did you get

1300 . . . . . .

 

[Unused Account 1]

That will cut anything ,might invest ,thanks for the info

 

[The Bear]

The Montolit evo looks interesting, anyone else used one? The cutters I’m currently using daily are a montolit mp75, mp93, Rubi dc250 110v 1200 wet saw . Love them all but the wet saw is insanely loud and installing 1200x1200 porcelain day in day out nowadays!

 

[Unused Account 1]

The Montolit evo looks interesting, anyone else used one? The cutters I’m currently using daily are a montolit mp75, mp93, Rubi dc250 110v 1200 wet saw . Love them all but the wet saw is insanely loud and installing 1200x1200 porcelain day in day out nowadays!

Big tiles ,big money ,good for you

 

[Joshjupp]

The Montolit evo looks interesting, anyone else used one? The cutters I’m currently using daily are a montolit mp75, mp93, Rubi dc250 110v 1200 wet saw . Love them all but the wet saw is insanely loud and installing 1200x1200 porcelain day in day out nowadays!

Love a monti I have 3 monti cutters like the look of the month flash line should be good for planks and large format

 

[Tiler Durden]

A couple of old TS’s one green and one red box
Montolit master P
Sigma Max
Montolit flash line
Batipav profi
Keeps me going with most tiles I need to cut.

 

[Italy]

I go to the garage to count
because I don't remember ......