Newbe

[Ricky]

Hi all I currently fit out bathrooms and tile them myself. But I have a big job in my own house that I want to do my self for the satisfaction to say I done that. Im after some advice as its a big area and hope you all can help me.

Any help much appreciated. I am currently doin up a house and have knocked thru my lounge and diner into one. All the floor boards have been chopped about from previous re wire and heating install so I have chose to take up all floor boards and replace with 18mm ply. I'm going to put durabase ci++ matting overt the top of that and tile with 600mm x 600mm porcelain tiles.
What I would like to no is what is best method to stick the durabase matting down with correct me if I'm wrong, I'm thinking a flexible adhesive. Also would I use a flexible adhesive on the matting for the tiles?

 

[White Room]

Hi and welcome, I'd use an S1 adhesive for both applications.....

 

[Qwerty]

Welcome

 

[Old Mod]

Hi and welcome to the forum.

 

[Ricky]

Hi and welcome, I'd use an S1 adhesive for both applications.....

Hi and Thanks for taking time to reply. Does the ply need to be sealed using s1?

 

[White Room]

Hi and Thanks for taking time to reply. Does the ply need to be sealed using s1?

Check with the brand you use, they can differ.

 

[Ricky]

Check with the brand you use, they can differ.

Ok I'll check it out thanks for advice

 

[Italy]

Welcome to tf

 

[Time's Ran Out]

Welcome and good luck!

 

[Dan]

Welcome to tilersforums.com Thanks for posting in The Welcome Forum. Head over to the main Tiling Forum if you'd like to ask any questions. Feel free to head over to any of the more applicable forum categories if one is more suitable.