S
Sico31
hi
I am new to this forum. Wanted to get some advise if possible.
I had a new tiled floor laid a couple of years ago. The tiles have started to crack soon after completion and are now a complete mess.
The floor build up is a timber hoist floor spaced at 300mm centres with 18mm ply board 10mm marmox Board electric underfloor heating mat. The bit that looks odd to me when lifting the tile there is 40mm of adhesive which is all cracked and loose. Most of the tiles have debonded from the adhesive too.
Seems to me that 40mm of tile adhesive is crazy.
Can anyone give advise on if this is normal and what would be the best way to remedy.
Some photos too
Many thanks
I am new to this forum. Wanted to get some advise if possible.
I had a new tiled floor laid a couple of years ago. The tiles have started to crack soon after completion and are now a complete mess.
The floor build up is a timber hoist floor spaced at 300mm centres with 18mm ply board 10mm marmox Board electric underfloor heating mat. The bit that looks odd to me when lifting the tile there is 40mm of adhesive which is all cracked and loose. Most of the tiles have debonded from the adhesive too.
Seems to me that 40mm of tile adhesive is crazy.
Can anyone give advise on if this is normal and what would be the best way to remedy.
Some photos too
Many thanks