Advice about readymix suitability

[William Connolly]

Looking for advice. Have previously used Mapei Keraquick for 400x400 porcelain tiles with great success. I now have another small diy job to complete with 445x320 ceramic tiles above a bath with shower. I have been advised by my local supplier that Mapei Progrip D2 (ready mix) is suitable onto green plasterboard. The Mapei technical blurb confirms it is D2T suitable for showers and ceramic tiles but doesn't confirm tile size. Some retailers suggest it is suitable for larger formats but I'm not sure even though the 445x320 isn't particularly 'large'.

Any advice about suitability of the Mapei Progrip D2 would be welcomed.

 

[Andy Allen]

Ready mixed adhesive isn't really suitable for tiles above 300 x 300 as it drys by dispersion and not chemically as a powdered adhesive would.

 

[hmtiling]

I wouldn't fix a tile above 300mm with ready mix if i was you. I don't use it at all but that's not to say it doesn't have its place.

 

[Flintstone]

I don't use it but if I had to I wouldn't use it on anything more than 6x6 tiles. Just get some powder adhesive and be sure it's right, the bond is infinitely better with powder.
P.s

Can you send me a signed photo please

 

[Andy Allen]

Big yin !!

 

[LM]

Are you intending to tank the shower area?

 

[William Connolly]

Are you intending to tank the shower area?

Yes, I've previously used Mapei's waterproofing kit in a walk in shower and found it easy to use so intend using same in this case.

 

[LM]

Yes, I've previously used Mapei's waterproofing kit in a walk in shower and found it easy to use so intend using same in this case.

Then in that case you should be using powdered adhesive. 🙂

 

[William Connolly]

OK,powdered adhesive it is then but which one? Mapei Keraquick is my previous experience of powder, though it didn't give much time to use it before it went off. Any powder recommendations which might give a slower DIY enthusiast more time to work?

 

[hmtiling]

weber, tilemaster, ultra and ardex all do good standard set adhesives as do mapei. I'd go to a local independent tile shop instead of b&q or alike.

 

[Dumbo]

weber, tilemaster, ultra and ardex all do good standard set adhesives as do mapei. I'd go to a local independent tile shop instead of b&q or alike.

Definitely local independent way to go .

 

[William Connolly]

Ardex X77 (white) has been recommended as suitable for the task with the benefit of extended pot life, open time etc. Any thoughts on X77?

 

[Dumbo]

Ardex X77 (white) has been recommended as suitable for the task with the benefit of extended pot life, open time etc. Any thoughts on X77?

Expensive

 

[LM]

Ardex X77 (white) has been recommended as suitable for the task with the benefit of extended pot life, open time etc. Any thoughts on X77?

Your now talking about the super cars of the adhesive world, no need for that, s simole C2 adhesive will be more than ample. Google it for availability in your area, you won't have to go to far.

 

[William Connolly]

Many thanks for the comments & guidance, going with Mapei Keraflex (white) which seems to fit with the advice given and Mapegum WPS to tank the shower/bath area.

 

[Mapei UK Marketing]

Many thanks for the comments & guidance, going with Mapei Keraflex (white) which seems to fit with the advice given and Mapegum WPS to tank the shower/bath area.

Great choice of product systems. (Well we were always going to say that weren't we!!) If you need any further information on Keraflex visit Hydraulic setting adhesives - http://www.mapei.com/GB-EN/Products-for-Ceramics-and-Stone-Materials/Hydraulic-setting-adhesives and if you ever need any guidance on product selection or application our Technical Services Team are always available to offer assistance. They can be contacted on 0121 508 6970 (ext 2) or [email protected]

Also please remember to post some of your project pictures we'd love to see them!