You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser.
grout colour
The following is a list of characters that first appeared in the BBC soap opera EastEnders in 1985, by order of first appearance. They were all introduced by executive producer Julia Smith. The first episode of EastEnders was broadcast on 19 February 1985, and twenty-three main characters were already created for their first appearance. The first character to be seen was Den Watts, followed by Ali Osman and then Arthur Fowler, all of whom find Reg Cox dying in his flat. Ethel Skinner, Harold Legg and Pauline Fowler appear, after Den alerts them of Reg's death. With Ethel is her pug Willy along with Lou Beale. Saeed and Naima Jeffery are seen working in the local shop whilst Angie Watts is seen in The Queen Victoria, Walford's local pub. Nick Cotton and Sue Osman are next seen, whilst Pete and Kathy Beale work at the fruit and veg stall and Hassan Osman is seen with his parents in the café. Sharon Watts, Ian Beale and Michelle Fowler are next seen and Mark Fowler is seen going into the bookies. Lastly, Roly the dog is seen in the pub when a fight breaks out.
Lofty Holloway is introduced on 26 February along with Terry Rich, and Tony Carpenter is introduced on 28 February. Mary Smith and her daughter Annie are introduced on 5 March. Tony's son Kelvin is introduced on 12 March. Andy O'Brien is introduced on 21 March along with Debbie Wilkins. Chris Smith was introduced on 7 May and Mehmet Osman was introduced on 13 June as a recurring character. Hannah Carpenter arrived on 25 June as Tony's wife and Dot Cotton was introduced on 4 July followed by Ernie Mears on 16 July. Detective Sergeant Roy Quick was introduced on 20 August as Walford's detective. Martin Fowler was born on 30 July and Simon Wicks arrived on 5 October. Lastly, the wife of Mehmet, Guizin Osman arrived on 22 October, and Cassie Carpenter arrived as the daughter of Hannah and Tony.
Hello everyone,
I have redone the tiles (porcelain ones) in the kitchen. The grout used, BAL Micromax3 Eco, has turned out to be quite lighter than the sample in store, creating an unwanted effect.
Tiler say there is nothing I can do now, besides removing the grout (risking to damage the...
Help! Advice needed please!
I am in the middle of a bathroom renovation that my partner is doing for me. He is a plumber/all-rounder rather than a pro-tiler but has had plenty of experience and success tiling.
I decided to go with metro tiles (against his better judgement!) and Mapei ultra...
Hi - any advice would be gratefully received.
The colour of the grout in my bathroom varies from light to dark grey.
I used Elise Pink Hexagon Wall and Fall Tiles from Victoria Plumbing, and Mapei flexible wall and flour grout in Grey. My bathroom fitter installed the tiles. At first I...
I’m bad with colors. Trying to asses if my current grout color is white, ivory or light grey. I wanted clean the grout and use a grout pen to match existing color. The white seemed to be an incorrect match. What is your opinion on what the grout color is from this pic?
Hi all,
can anyone offer advice on what grout colour this is or similar?
I’ve added extra tiles to exsisting work done by previous owner and looking to match the grout used.
thank you
I used Nexus Projoint Mid Grey Porcelain grout on our patio and it hasn't come out quite as dark as I would like. I should have gone for the darker grey, the mid grey looked great initially but its almost exactly the same colour as the tiles now that it's cured. It looks great when it's wet...
Just that really. Builder bought wrong colour grout, and tiler has used it. 1 room out of 2 done and it looks crap.
What can be done? I'm looking at grout dyes, but not sure how good the finish will be in terms of evenness / staining etc. and that is assuming a decent colour match can be...
Hi all,
First of all this is my first time tiling and I’m diyer.
After a month I’m almost there with my tiling. See attached photo. I have 2 different tiles as it can be seen, the marbles are on all 3 walls and it’s going on the floor too, it suppose to have 2mm joints but because the edges...
I have laid 30m2 of light grey 300x600 porcelain tiles, and the grout is too light (same colour as tile). Is there any product out there I can use to darken/stain it a dark grey?
I’m tiling a bathroom with a cement grey tile and mosaic glass border. I’ve tried a couple of different grout colours but the grout I like for the tile (mid grey) seems too dark on the mosaic.
Would it be crazy to use a different (lighter) colour grout for the border. And if it’s not a...
what would be the best colour of grout to use on these style of tiles , was originally thinking of an anthracite colour , but some of the white tiles are 1mm smaller than the black !
I've just tiled my bathroom and started grouting tonight with Bal micromax gunmetal. The grouts been down approx. 4 hours and looks to be drying very patchy colour wise. Most of it looks to be drying fairly light, while some smaller areas are a totally different shade. Granted, I appreciate it...
Mark Parmley
Thread
adhesive
bal
bal adhesive
building adhesives
colourgroutgroutcolour
tile grout
uneven
Hello All,
My story: I’m not a tiler, but getting a house built, so had to choose tiles & grouts. Due to traveling, I had to choose from one brand (Sopro), while the tiler preferred colour in another brand (Mapei).
I wanted to match the colours online to send the correct code - just to face...
So have finished grouting our 600x600 white kitchen floor tiles and the white grout is dirty already, and the wife has decided she would prefer dark grey!!
We were originally going to go for mapei anthracite, I don't fancy spending weeks removing the grout?!
Would something like mapei fruga...
Hi guys.
Hoping someone could help me out.
I've been asked to replace some broken tiles and I'm not sure what colour grout this was originally.
Customer says more of a brown as she can't remember. I'm thinking more dark grey that's now very dirty?
Thanks.
The new range of colours called “Set the mood” is divided into five collections: Serene, Traditional, Natural, Romance and Glamour, making it easier to choose the right grout according to the requirements of each tiling project and personal preference. Visit http://bit.ly/2qm4C9o for further...
Just laying large format 80x80 porcelain tiles on underfloor heating with 2mm grout line in my place. Also laid on Durabase isolation layer.
Any advise on Grout Type and Colour. My preference is a colour that merges in with the tile colour rather than contrasting it.
The tiles are very light...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.