Wet tile saw

[Jon84]

Hi all. I'm new to the forum and after a bit of advice on a new wet saw. I've read all the recent threads on here but not really found enough to go on.
I'm a bathroom fitter so I'm tiling pretty much every week, I've been using a vitrex 750 wet saw for a while and have got through a few of them. Always having problems with the guide getting bent at the back so not able to push tiles through.
The most recent one I had seemed to drift off by a few mm too.
I've decided I need to invest in something a lot better so after some advice. I know the dewalt 24000 seems very impressive, although very expensive. Been looking at the rubi nd200 also which is half the price.
I do a lot of tiling albeit mainly small bathrooms so need something that's going to last!
Any advice would be much appreciated.
Thanks!

 

[Old Mod]

Hey Jon,
Welcome to the forum!
Ask @whitebeam he uses the ND 200 swears by it!
He'll be along shortly 😀

 

[White Room]

The nd200 has been a god send, replaced with a better blade though, changed the on/off switch last year other than that been all good and would recommend.

 

[p4ulo]

I removed the screws from the guard holder on my Vitrex, and make sure the holes are clean, so it can slide about a bit and never had any problems with it.
I think if I was busier though I'd want something better.....folks seem to only have good things to saw about the DEWALT.
If you find a Buy One Get one Free, give us the free one please??!

 

[Qwerty]

I can't imagine being without my Dewalt!

 

[Jon84]

The Dewalt looks amazing, it's so much money but if I'm using it every week then I'm thinking it would pay for itself.
Only thing I was concerned about is angled cuts on 600mm tiles?
Or anything bigger than that for that matter. For that price I would want it to be able to cut tiles bigger than that!
Is it the DNA blade you changed to on your nd200 @whitebeam?
Thanks for replies

 

[Dave]

Norton do some good cutters as well...

 

[White Room]

The Dewalt looks amazing, it's so much money but if I'm using it every week then I'm thinking it would pay for itself.
Only thing I was concerned about is angled cuts on 600mm tiles?
Or anything bigger than that for that matter. For that price I would want it to be able to cut tiles bigger than that!
Is it the DNA blade you changed to on your nd200 @whitebeam?
Thanks for replies

Yes it was, I've cut 800x600 limestone on my ND.

 

[Dan]

I don't know if it's of any use but I made this thread earlier linking to loads of DNA threads.

Montolit DNA Blades for Tile Cutters

 

[p4ulo]

Jesus @Dan, will you drop it with the DNA blades (jk!!)

 

[Jon84]

Been reading a few threads on the Dewalt and a lot of people saying they only use them on jobs with stone?
Would I Be better off with a rubi nd200? All my jobs are average sized bathrooms with ceramic or porcelain usually?
Don't want to splash out if it's too heavy duty for what I need?

 

[Qwerty]

The dewalt is big and I use it for everything but in your case the rubi might be better

 

[White Room]

Either one you would need to cut out outside or if your lucky in their garage if it isn't filled up with junk....

 

[Jon84]

I just want one that cuts straight. The vitrex one was a nightmare as the metal bracket that holds the water guard easily bends and once it's bent it's pretty much useless.
The rubi comes with a box which is a great start!
Any others worth looking at other than those two?

 

[White Room]

Norton have some good cutters....

 

[Qwerty]

Norton have some good cutters....

Was about to recommend Norton myself

 

[Jon84]

Just had a quick google. Is there a good UK supplier of nortons? Thanks

 

[lizzardtong]

Ctd do nortons. But have a look at sigma
Got one 2nd hand and its awesome

 

[Dan]

norton tile cutter | eBay

NORTON Flexovit Clipper TT200EM 200mm Water Powered Tile Saw 800 Watt 240 Volt: Amazon.co.uk: DIY & Tools

Can't find them on the CTD website but found some blades on there. Worth ringing them though?

And old thread, might help, not sure: norton or einhell ???