Tile trim with metro tiles

[Rachel81]

I’m planning to use an L shaped trim for metro tiles with bevelled edge. Is it best to always have a cut edge agains the trim or doesn’t it matter? Just wondering because of the gap on the bevelled edge or will it not be noticeable as the adhesive will level it out a bit?

Thanks

 

[High Peak Tiling]

Hi Rachel.
Without knowing all the details. Do not put the cut edges into a grout joint, especially when they are the Metro tiles.
You may find you will need a different size trim dependant on where on the tile the trim will sit.
For example - manufactures edge may be 5-6mm but when placing trim on a cut edge it will measure 6-8mm.

Hope this helps.

 

[Andy Allen]

I would just use 8mm all round on the cut edge and beveled edge..

 

[Rachel81]

Ok thanks

 

[Time's Ran Out]

Mitre them!

 

[Andy Allen]

Still waiting for a pic off someone who has mitred metros......

 

[LM]

Still waiting for a pic off someone who has mitred metros......

Agreed and kitchen walls for the most part aren’t exactly flat either which doesn’t help.

 

[John Benton]

Still waiting for a pic off someone who has mitred metros......

Just for you Andy

 

[Blunt Tool]

Still waiting for a pic off someone who has mitred metros......

Саенко Виктор on Instagram: “Получилось реализовать идею с люком,сделать его более практичным. Слева,вырезал лист ГВЛ по контуру плитки, с права заусовка ,по другому…” - https://instagram.com/p/BfFlkZ_h2os/

 

[Simon Dale]

Fired Earth do half tiles with a glazed edge. Cost about a million quid !

 

[Andy Allen]

Just for you Andy

View attachment 96668

Not very clear john....

( And your trims overhanging)...

 

[Andy Allen]

Саенко Виктор on Instagram: “Получилось реализовать идею с люком,сделать его более практичным. Слева,вырезал лист ГВЛ по контуру плитки, с права заусовка ,по другому…” - https://instagram.com/p/BfFlkZ_h2os/

Is that your job....?
Was it done when you lived in Moscow..?

 

[Blunt Tool]

Is that your job....?
Was it done when you lived in Moscow..?

Da!

 

[Rosco100]

That's cool

 

[John Benton]

Not very clear john....

( And your trims overhanging)...

Not my choice Andy it’s what customer wanted so all trims were same width