Silicon gun, elbow joint

[Leatherface]

Chaps,
here is another handy product to have in your tool box.
Makes siliconing round back of sinks and hard to reach places much easier.
Have not got one yet, but thinking of giving it a try.

Comes from a certain German tool manufacturer.
Best not put link here as I do not want to upset any of our paid advertisers :yes:

 

[DHTiling]

Check out TRADE TILER for those nozzles.....


Silicon Swivel Nozzles x 3 and extension

http://www.tradetiler.com/acatalog/Silicon-swivel-200.jpg
By swivelling the nozzle tip, an angle of up to 90 degrees can be achieved.

The 100 mm extension tube will also help get into all those difficult places.

Fits all standard type Silicon tubes.

Pack contains:

3 x nozzles
1 x extension tube (100 mm long)


Price: £1.69 £1.94 Including VAT at 15%
TradeTiler.Ltd Siliconing - sealers/primers

 

[Leatherface]

Check out TRADE TILER for those nozzles.....


Silicon Swivel Nozzles x 3 and extension

http://www.tradetiler.com/acatalog/Silicon-swivel-200.jpg
By swivelling the nozzle tip, an angle of up to 90 degrees can be achieved.

The 100 mm extension tube will also help get into all those difficult places.

Fits all standard type Silicon tubes.

Pack contains:

3 x nozzles
1 x extension tube (100 mm long)


Price: £1.69 £1.94 Including VAT at 15%
TradeTiler.Ltd Siliconing - sealers/primers

Great, thanks for that, didn't know he sold them

 

[Colour Republic]

Yeah I saw these on his site the other day but wasn't convinced that they would stay in the desired place as I tend to put a bit of pressure on the tip whilst I Silicon. I get the imprssion that everything that is sold on the site is tested by David first and he wouldn't sell something he knows is rubbish. But has anybody here any first hand experiance?

 

[Colour Republic]

Hang on a minute! After looking ath the picture again I've realised that the couple of silicones I bought off him the other day have these fitted! I thought they looked a bit wierd and gave them a little twist but they didn't move so I forgot about it. Must try again with a bit more pressure tommorow, so they must stay in place if it's quite hard to get them into postion in the first place

 

[faithhealer]

Yes, they can be handy, also been known to 'jam' one nozzle onto another to get extra length! Crude but effective

 

[DHTiling]

Tradetiler ones have a 100mm extension john..

 

[faithhealer]

Tradetiler ones have a 100mm extension john..

Didn't think that far ahead mate

 

[Fred]

The Silicon is good to..................:smash: