A
Amir Patwa
half knowledge is DANGEROUS, I thought this forum was for helping out and not slagging!
Grind down tiles to get rid of lip page?
A
Amir Patwa
When a GP FAILS A CONSULTANT WILL RECTIFY, !
You walked into that one yourself lol dont blame me for getting the giggles.
R
Rob Fisher
R
Russell brown
I'll get some photos tomorrow, the guys having a nightmare. I had to cut holes in the living room ceiling today when the £8k chandelier fell on has head when the fixings failed because there's a leak from the soil pipe. I'll be working here for about 3 months solid with the work he's given me so far
A
Amir Patwa
A good tiler will listen to those in the trade who do work and not selling wares! And discourage those in the know how to spread knowledge!
My two pence worth of advice
My two pence worth of advice
A
Amir Patwa
They do not grind and repolish! They remove localised lippage using hand polisher!
A
Amir Patwa
Ask for Isabella and Manuel the owner who told you that they do not carry out work for 3 rd party. You gave them the impression that you had 300 m2 for quartz tile to grind and polish! Wish you happiness
C
Concrete guy
You can't grind and re polish 10mm thick quartz tiles. I don't care who you are, and on that point New Image agree.
They didn't tell me they don't do work for a third party, they recommended that due to the nature of the product, the customer would be better off pulling it up and starting again, as even if they could grind and polish it it was unlikely they would be able to replicate the manufacturer finish. I agree with them, so does Marble Shine and so do any other professional floor re finishers that we deal with.
The OP stated there was £37,000 worth of quartz flooring to rectify. At £100 sq/m it's not unreasonable to arrive at 300+ sq/m.
They didn't tell me they don't do work for a third party, they recommended that due to the nature of the product, the customer would be better off pulling it up and starting again, as even if they could grind and polish it it was unlikely they would be able to replicate the manufacturer finish. I agree with them, so does Marble Shine and so do any other professional floor re finishers that we deal with.
The OP stated there was £37,000 worth of quartz flooring to rectify. At £100 sq/m it's not unreasonable to arrive at 300+ sq/m.
R
Russell brown
Here's a few pictures of it, not the best sorry I'll have to get some more
A
Amir Patwa
Russell it is the easiest job I have seen ! Use SOFT DIAMONDS (most uk supplier will not have them) and you will have to repolish using cream pads and clear granite polishing powder
C
Concrete guy
Russell, How thick are the tiles and how many m2 needs refinishing?
R
Russell brown
You're right they're about 10mm I've not really looked at them properly and I'd say roughly 60m out of the 200 m laid so far
Jeez!!!
C
Concrete guy
You've got a number of potential issues.
1/ The compatibility of the tile with underfloor heating, has this been confirmed with the manufacturer as much of this quartz has a habit of curling up at the edges when the heating is run?
2/ Lets assume there is a company that can grind and refinish this stuff to a decent degree, when you reduce the thickness of the tile even by 2mm or 3mm it increases the prospect of point 1 occurring.
3/ Once you start trying to rectify it becomes your problem.
So as it's only 60m2 so far, suggest they pull it up and fit it correctly. Having first checked it can be used with UFH.
1/ The compatibility of the tile with underfloor heating, has this been confirmed with the manufacturer as much of this quartz has a habit of curling up at the edges when the heating is run?
2/ Lets assume there is a company that can grind and refinish this stuff to a decent degree, when you reduce the thickness of the tile even by 2mm or 3mm it increases the prospect of point 1 occurring.
3/ Once you start trying to rectify it becomes your problem.
So as it's only 60m2 so far, suggest they pull it up and fit it correctly. Having first checked it can be used with UFH.
R
Russell brown
Couldn't get a definitive answer from the manufacturer about it being compatible just like I couldn't get a definitive answer on addy when I first enquired about it when originally quoting the job. All that was said by all parties was if a matting was used in conjunction with and expansion joint it should be ok. Bal wouldn't recommend an addy as such and the one mapie and the one the manufacturer recommended conflicted. The customer is aware that the tiles may buckle and has said if they do he'll replace them. Money isn't an issue he's extending the pool with a basement underneath which he wants to house a bowling ally, cinema and wine cellar. He also wants to put a sliding roof over the court yard and tile the lot which is roughly 500m2. I haven't a problem re ruling it I just don't want to do it the way it's been done and that's what he wants, so I was looking for a quick fix. If it isn't possible I'll have to do it rather than losing the rest of the work.
@Russell brown do you suppose its just the fisruption of lifting it all and redoing it thats swaying your client towards a "quick fix"
C
Concrete guy
Well with that kind of budget I'd be suggesting he replace the man made stuff with marble which wouldn't then come with a whole list of "maybes' and possiblies"
I was involved in the manufacturing of quartz for a while so I have first hand knowledge of this stuff.
Everything about this job so far screams to me that the wrong product has been selected at day one.
That said, one of the respondents to this thread says it can be re ground and re polished. I'd actually like to see that and see the finished article, then see it 12 months down the line after a number of heat cycles to see how it's all coped.
It sounds like the perfect job on which to try it.
I was involved in the manufacturing of quartz for a while so I have first hand knowledge of this stuff.
Everything about this job so far screams to me that the wrong product has been selected at day one.
That said, one of the respondents to this thread says it can be re ground and re polished. I'd actually like to see that and see the finished article, then see it 12 months down the line after a number of heat cycles to see how it's all coped.
It sounds like the perfect job on which to try it.
There are similar tiling threads here
Featured Threads
-
- F
- W
-
- I
-
-
-
-