Guest viewing is limited

bathroom tiling - any advice appreciated

C

connors12345

TF
tiling the in laws bathroom soon. taking tiles off and full tile. any advise on speed taking tiles off. also will fill any holes with rapid set. am i still ok to use tubbed adh. white star being used. with rapid set being water resistant am i ok to use tubbed. also do i need to use any primer first. if so is apd or bal bond the way to go
cheers folks
 
Sort by date Sort by votes
Re: any advice appreciated

What are the walls made from, if they are plasterboard you are quicker ripping the whole lot off and reboarding. If plaster then you may find a lot of it comes away with the tiles so you will either have to skim up with rapidset or dot n dab plasterboard up.

White star will be fine. if you are skimming over plaster with the rapid set, you will need to prime with APD.
 
Upvote 0 Downvote
Re: any advice appreciated

connors12345 said:
cheers grumpy... if i do have to dot and dab over existing plaster. can i use rapid set? sorry for being dumb, but i havent had the pleasure of doing this yet
cheers folks
Click to expand...
Hi connors, you can dot and dab plasterboard onto existing plaster, but prime with apd first. If they choose a porcelain tile White star is not the one, prime the board and use single part adhesive....Gaz
 
Upvote 0 Downvote
Re: any advice appreciated

I would use dry wall adhesive to stick the boards and do a few machanical fixings thru the dabs of ahesive when there've set into the existing brick wall
 
Upvote 0 Downvote
Re: any advice appreciated

connors12345 said:
do i have to prime the back of the plaster board first.....???? i am perplexed aswell.
Click to expand...
The answer to the question is yes you can use rapid to dot and dab boards if primed, boards and plaster...I would do this with the regular tilers stuff on the van, drywall adhesive isn't usually one of them...using drywall adhesive needs no primer at all...:thumbsup:
 
Last edited by a moderator:
Upvote 0 Downvote
Upvote 0 Downvote
Re: any advice appreciated

I went to bed last night hoping that when I got up this thread would have gone and it was all just a bad dream. But it is still hear!
Now hare is my problem since joining this forum I have come to respect the opinions of certain forum members, as on the posts that I have read they are giving good sound advice but on this issue I am very disappointed.
It was late and you’d had a long day but pleas tell me you are not seriously saying it is ok to dot and dab plasterboard on to a plastered wall with just a bit of rapid set and a lick of primer.
This makes a mockery of the fixing guidelines not to mention the weight issue. And it is not just this one thread it has been said a number of times by several different members.
On the record I disagree with you all. Thin set rapid set adhesive is not suitable for dabbing plasterboard and if you are dabbing on to skimmed walls use board adhesive and mechanically fix as well.
 
Upvote 0 Downvote
Re: any advice appreciated

deanotile said:
I went to bed last night hoping that when I got up this thread would have gone and it was all just a bad dream. But it is still hear!
Now hare is my problem since joining this forum I have come to respect the opinions of certain forum members, as on the posts that I have read they are giving good sound advice but on this issue I am very disappointed.
It was late and you’d had a long day but pleas tell me you are not seriously saying it is ok to dot and dab plasterboard on to a plastered wall with just a bit of rapid set and a lick of primer.
This makes a mockery of the fixing guidelines not to mention the weight issue. And it is not just this one thread it has been said a number of times by several different members.
On the record I disagree with you all. Thin set rapid set adhesive is not suitable for dabbing plasterboard and if you are dabbing on to skimmed walls use board adhesive and mechanically fix as well.
Click to expand...
The original question was a board going in between units Deanotile. I wouldnt endorse doing a whole room because of the cost. If primed to separate gypsum board from cement based addy, the boards can be fixed with rapid set or any cement based adhesive....Gaz
 
Upvote 0 Downvote
Re: any advice appreciated

GazTech said:
Yes con, dot and dab with rapid if primed, yes to white star if not porcelain ....:thumbsup:
Click to expand...
I have tried my best to ignore this one but it is just wrong. Firstly the recommended bed depth for rapid set is 6mm so if you are thinking of using rapid set for dabbing plasterboard you should not exceed 10mm in isolated arrears whereas the correct product “dry wall adhesive” is designed to do this job.
My second bone of contention is skimmed plaster has a weight limit of 20kg per square meter. If you just dab plasterboard over the top you have not given yourself 32kg but have decreased the 20kg by the weight of the adhesive and the plasterboard.
If any body is uncertain as to whether rapid set is suitable for dabbing plasterboard give the BAL technical support a ring 0845 600 1 222 as I did today and you should get the same answer as me
(no it is not)


Oh yeah the original post was not boarding in-between units it was boarding a bathroom.
 
Last edited by a moderator:
Upvote 0 Downvote
Re: any advice appreciated

Deano quote; On the record I disagree with you all. Thin set rapid set adhesive is not suitable for dabbing plasterboard and if you are dabbing on to skimmed walls use board adhesive and mechanically fix as well.

You obviously did'nt read my post then

whitebeam quote; I would use dry wall adhesive to stick the boards and do a few machanical fixings thru the dabs of ahesive when there've set into the existing brick wall
 
Upvote 0 Downvote
Re: any advice appreciated

whitebeam said:
Deano quote; On the record I disagree with you all. Thin set rapid set adhesive is not suitable for dabbing plasterboard and if you are dabbing on to skimmed walls use board adhesive and mechanically fix as well.

You obviously did'nt read my post then

whitebeam quote; I would use dry wall adhesive to stick the boards and do a few machanical fixings thru the dabs of ahesive when there've set into the existing brick wall
Click to expand...
I did read your post it is spot on:thumbsup:. The all I was referring to was actually grumpy and gaz as they are saying it is ok.:mad2:
 
Upvote 0 Downvote

There are similar tiling threads here

M
Discoloured Porcelain Tiles - Any Suggestions? (UK)
Replies
2
Views
568
Dave
Dave
M
Porcelain tiles on skimmed honeycomb plasterboard wall
Replies
2
Views
503
Mark R
M
J
Issues with Tiling Over Old Concrete Slab—Looking for Advice
Replies
4
Views
728
Kastar UK
Kastar UK
G
cut ties with the contractor and now have a badly done, half finished bathroom
Replies
6
Views
1K
Tile Marble Granite
Tile Marble Granite
Stompfrog
Levelling and tiling en-suite floor with Mapei Ultraplan Renovation
Replies
10
Views
2K
Dave
Dave

Featured Threads

Advertisement

Thread Information

Title
bathroom tiling - any advice appreciated
Prefix
N/A
Forum
Bathroom Tiling Advice
Start date
Last reply date
Replies
26
Unsolved
--

Thread Tags

Tags Tags
advice bathroom bathroom tiling tiling usa

Advertisement

Tilers Forums Official Sponsors

UK Tiling Forum; UK

Thread statistics

Created
connors12345,
Last reply from
White Room,
Replies
26
Views
4,485

Thread statistics

Created
connors12345,
Last reply from
White Room,
Replies
26
Views
4,485
Tilers Forums UK | UK Tiling Forum
https://uktilingforum.co.uk | UK Tiling Forum
Back