T
Speechless. Watch This!
- Thread starter Tile Shop
- Start date
-
- Tags
- aus dot and dab this usa
He's nearly there eh
You'd have to lift a tile to see if that didn't work because he did seem to push on quite a bit so those blobs could have joined on some tiles. I doubt all. He knows what he's doing I think because his set out there and working practice is bang on. It's just he could have done with skimming and buttering the tiles properly if he needed to bed them out.
Bad if he's not managing to get those blobs to meet because it doesn't seem a bad job other than that and the stone will definitely crack if you put any sudden point pressure where there is no adhesive.
Shame.
You'd have to lift a tile to see if that didn't work because he did seem to push on quite a bit so those blobs could have joined on some tiles. I doubt all. He knows what he's doing I think because his set out there and working practice is bang on. It's just he could have done with skimming and buttering the tiles properly if he needed to bed them out.
Bad if he's not managing to get those blobs to meet because it doesn't seem a bad job other than that and the stone will definitely crack if you put any sudden point pressure where there is no adhesive.
Shame.
I
Ian
That's genuinely painful to watch, I don't understand the thought process behind that at all.
He spent ages getting the adhesive right too. Could have just used a thicker trowel or just not scraped off so much. Or buttered the tile too.
Hoped it was going pop up with a message saying "don't do it this way" then redo the tile proper but it didn't lol
It did seem to ooze out quite a bit on the front edge but I doubt all the tiles would have done that and I doubt the back of that first tile had enough adhesive under it.
Proper shame.
Hoped it was going pop up with a message saying "don't do it this way" then redo the tile proper but it didn't lol
It did seem to ooze out quite a bit on the front edge but I doubt all the tiles would have done that and I doubt the back of that first tile had enough adhesive under it.
Proper shame.
S
StevieBoy
I agree with Bri, painful to watch indeed.
5 blobs on the back of those tiles is nowhere near enough, it would need either 9 or 12 depending on the size of tile so that when its laid you more or less get a solid bed underneath, especially with soft tiles like trav.
I'll bet he was a ground worker laying slabs before he did tiling.
5 blobs on the back of those tiles is nowhere near enough, it would need either 9 or 12 depending on the size of tile so that when its laid you more or less get a solid bed underneath, especially with soft tiles like trav.
I'll bet he was a ground worker laying slabs before he did tiling.
N
Nuno
In my ignorance, why did he put the adhesive on the floor? Waste of adhesive!! ha ha ha
B
bcd-87
we should all go round with bars of soap in a towel and beat him
O
Olz
The poor lads just using as much addy as possible to max out his Webber points balance
S
StevieBoy
Stupid Boy ! 
Thought he was going to back skim the tile for a minute. ...
But alas Mr blooby rears his ugly head....🙁
But alas Mr blooby rears his ugly head....🙁
I
Italy
tiler for sale on ebay
HORROR 😡😡😡😡😡😡😡😡😱😱😱😱😱😱
HORROR 😡😡😡😡😡😡😡😡😱😱😱😱😱😱
There's a job for someone down the line
I thought he was doing ok until mr blobby popped out. I wonder if the owner has seen it😱
I thought he was doing ok until mr blobby popped out. I wonder if the owner has seen it😱
W
White Room
Exactly what I thought....
Horrible to watch and not a hope of them blobs joinin
S
StevieBoy
And pulled it back so far, he gowled his knees up with addy.
O
Old Mod
It's not a wonder he didn't show his face!
That was tragic to watch! 🙁
It was clean tho! Haha
That was tragic to watch! 🙁
It was clean tho! Haha
O
One Day
Honest question: Why would a great tradesman need to advertise via Youtube anyway?
If he's so great work will be looking for him surely?
An old tiler told me when I started out - if you always do your best work no matter the stress or cost to yourself, then after five years or so you'll never have to advertise for work. So far he's been bang-on.
If he's so great work will be looking for him surely?
An old tiler told me when I started out - if you always do your best work no matter the stress or cost to yourself, then after five years or so you'll never have to advertise for work. So far he's been bang-on.
O
One Day
Here's another - even the ones who look like they are ok!
Keraquick s1 onto chipboard? Yet another loose bathroom floor in the making...🙄
View: https://www.youtube.com/watch?v=fiFErZal85w
Keraquick s1 onto chipboard? Yet another loose bathroom floor in the making...🙄
R
Rizzle from the Portizzle
if you want to get full covarare you sarrate in the opersite way to witch you are going to push the tile to break the ribs so here he neads to move left to right not up and down .needs to buy a piece of glass to see were he is going wrong
unbelievabubble! Gonna end up crazy paving!
Unreal.. 3 mins on how to tile correctly followed by 1.54 on how to mess up a floor. Did you see the amount of back butter that 1st tile should have had.
Y
yahoo2u2
FFS this is the guy I watched and look at the mess I am in 🙂
W
waynef
W
White Room
Good ole utube🙂
There are similar tiling threads here
- Sticky
Featured Threads
-
- F
- W
-
- I
-
-
-
Advertisement
Thread Information
Thread Tags
- Tags
- aus dot and dab this usa