D
Diamond Pool Finishers
[video=youtube;iD3vCXhWy8I]http://www.youtube.com/watch?v=iD3vCXhWy8I[/video] and especially this bit of top kit then ?
I
Ian
Got a grinder, 110v, top tool. Would never have a cordless grinder, I'd need far too many batteries! Only other Makita tool I own is a variable speed grinder for profiling/polishing.
D
Diamond Pool Finishers
[video=youtube;XwDUlV6VW8k]http://www.youtube.com/watch?v=XwDUlV6VW8k[/video] i have three of these Batteries , they are cracking grinders and batteries ,i cut most of my mosaics with this kit now !!
A
Aston
love makita gear but i haven't got the cordless grinder
B
Bubblecraft
I have a cordless Makita drill that I hate & a Makita 1/2" Router which I love
W
White Room
I have a Makita cordless cutter with water bottle, just collects dust.
Makita chopsaw, very accurate. Love it
D
Diamond Pool Finishers
same here used -it about 10 times blades used to chip so easy ,big wast of money too.....
S
Spud
I have the cordless drill driver 18v li ,the bmr radio ,the cordless impact driver 18v li cordless grinder 18v li and a 240v corded 41/2 grinder ,i really like makita its well made reliable and good value for money
Q
Qwerty
Got a cordless drill, jigsaw, radio & mains angle grinder. Wouldn't use anything else!
All my tools r Makita including the radio, but my Makita cordless grinder just isn't worth the money and I would only cut a few 6mm ceramics with it !
Most of my tools are Makita. very good investment and longlasting
D
Diamond Pool Finishers
is it an older modal then Area ?
C
charlie1
have 2 makita 110v grinders, love them both, very light.
J
jwatson
i have the makita saw with the hampster bottle, and use all time on ceramics, sits in my tool bag nicely. do most of my cuts by hand and mainly use it for the L cuts round the windows.
saves me time not setting one of my bigger machines up and cleaning them afterwards!!!
obvs useless if you do alot of stone.
would be good if they made one with the power of the cordless grinder as its only 12v and short on some real power.
saves me time not setting one of my bigger machines up and cleaning them afterwards!!!
obvs useless if you do alot of stone.
would be good if they made one with the power of the cordless grinder as its only 12v and short on some real power.
A
ailill
Have 6 makita hand tools, love them all. Very reliable, longlasting.
R
Rookery
I've got a Makita 14.4 drill driver which is fine for light duty work and a 240v SDS drill/driver/chisel thats fine too. Quality tools in my view.
I have the cordless makita tile saw, ive used it on porca,stone, ceramics,mosaics everything its superb for littleish cuts.cuts each cut with no chips,same blade for over 2 year, i ofcoarse dont use it day in day out, but its been well used. 🙂
I have drills and ofcoarse the radio,good kit is makita
I have drills and ofcoarse the radio,good kit is makita
W
White Room
Do you use the battery that came with it or did you get an upgrade. [MENTION=26806]widler[/MENTION]
G
Gazzer
4 Makita 115mm angle grinders. 1 drill and 1 pair of Makita knee pads
Newish model diamond about a year old ! What r you mainly using yours for?
nope same battery, like i said,ive used it on everything,not every day,but a job or 3 a month,great piece of kit.
im not cutting 600 x600 porca/stone ect half way (although i have when forgot my table once) takes too long,but around sockets in splashbacks,its ideal,or cutting a socket in the middle its great.
but hey ho,each to there own 😉
J
jwatson
i got an aftermarket 3ah battery for mine at Batteries4Less UK, Laptop Batteries, Cordless Drill Batteries, Power Tool Batteries, Laptop Chargers came with 1.3 which was pants
S
StephenR
Used a Makita chop saw and circ saw for about 10 years. Faultless. Got Makita angle grinder and work boots after my DeWalt ones fell to bits in 3 months. Bosch everything else.
Wish I'd bought Makita drill over the Hitachi but pennies were tight at the time. Give Hitachi their due though, they replaced the drill and 3 NiCads for LiIon when it all went pear shaped after 14 months.
Wish I'd bought Makita drill over the Hitachi but pennies were tight at the time. Give Hitachi their due though, they replaced the drill and 3 NiCads for LiIon when it all went pear shaped after 14 months.
the cordless angle grinder i wouldn't recommend,i have it and only use for light work,i think makita cordless stuff is great,i have most of it,buy a corded one if your using it for tiling.
the cordless angle grinder i wouldn't recommend,i have it and only use for light work,i think makita cordless stuff is great,i have most of it,buy a corded one if your using it for tiling.
D
Diamond Pool Finishers
just cutting mosaic and a little bit of ceramic/stone M8.....
Hay Darren we heard you the first time M8... lol
C
carlito
I am slowly moving towards full Makita set up. I have 2 grinders, jigsaw and the radio. Just stalking out the combi drills at the mo;-)
I've got makita angle grinder, 110v sds drill, 18v cordless drill, Cordless impact driver, Cordless small drill and led torch.
G
Gps
cordless grinders are not so good in my opinion. they lack the power of the corded versions. not really worth it considering you will pay more for a lesser tool
There are similar tiling threads here
- Sticky
Featured Threads
-
- F
- W
-
- I
-
-
-
