Finished Bathroom - Hexagonal Tiles

[Cat]

I came on here a while ago looking for a tiler as locals had let me down, John from here took the job on (I dont know how to tag him). He asked me to pop some pictures on here, so here they are, let me know what you think.

Now just to fit everything else into the bathroom.....

I've tried to take lots of pictures so you can see everything, sorry if its picture overload, and for the naming, I got bored naming them all...

Main Bath & Floor Picture

• Cat
• Mar 10, 2018

Main Sink Corner Picture

• Cat
• Mar 10, 2018

Main Back Wall Picture

• Cat
• Mar 10, 2018

Main Shower Picture

• Cat
• Mar 10, 2018

Hex Tiles Close Up

• Cat
• Mar 10, 2018

Around Bath

Hex Tiles Close Up

• Cat
• Mar 10, 2018

End of Bath

Hex Tiles Close Up

• Cat
• Mar 10, 2018

Around Bath

Hex Tiles Close Up

• Cat
• Mar 10, 2018

Around Bath

Hex Tiles Close Up

• Cat
• Mar 10, 2018

Where Mirror will go

Sink Corner

• Cat
• Mar 10, 2018

Window Corner

• Cat
• Mar 10, 2018

Under Window

• Cat
• Mar 10, 2018

Shower Side

• Cat
• Mar 10, 2018

Hex Tiles Around Niche

• Cat
• Mar 10, 2018

Hex Tiles Shower Wall

• Cat
• Mar 10, 2018

Hex Tiles Shower Wall

• Cat
• Mar 10, 2018

Hex Tiles From Shower

• Cat
• Mar 10, 2018

Bath & Floor

• Cat
• Mar 10, 2018
• 1

End Bath Panel

• Cat
• Mar 10, 2018

Floor Detail

• Cat
• Mar 10, 2018

Floor Detail

• Cat
• Mar 10, 2018

Shower Bottom

• Cat
• Mar 10, 2018

Shower Step Up

• Cat
• Mar 10, 2018

 

[Simon Dale]

There a pig to fix have to use your brain !

 

[judge]

Great job.nice to see something different too

 

[ttt tiling]

Blimey , that's a bit special

 

[Blunt Tool]

Different and lovely job!

 

[Time's Ran Out]

If you like it I did it - if not it was a different John.
Thanks Cat for posting your job and although I just left at 2.00 it looks quite good for a pensioner.
A lot harder than I anticipated but it was worth it to see something different.
Look forward to the final pictures with the Silicon and fittings up.
For those interested Cat has a chalet in Hemsby, a short walk from the beach, and it’s a home from home - well worth a summer break - but book well in advance!
Thanks again for the work and I hope you enjoy the results.
Timeless John.

 

[Blunt Tool]

If you like it I did it - if not it was a different John.
Thanks Cat for posting your job and although I just left at 2.00 it looks quite good for a pensioner.
A lot harder than I anticipated but it was worth it to see something different.
Look forward to the final pictures with the Silicon and fittings up.
For those interested Cat has a chalet in Hemsby, a short walk from the beach, and it’s a home from home - well worth a summer break - but book well in advance!
Thanks again for the work and I hope you enjoy the results.
Timeless John.

Did look a TJ standard job.

 

[Time's Ran Out]

Did look a TJ standard job.

Cat kept me right on a daily basis !

 

[Italy]

with a final edge trim in steel,
it would have been perfect....ahahah 😉
good job john

 

[Bill]

Looks good.

 

[Slippery]

There a pig to fix have to use your brain !

Personally, I prefer Ardex P9 for this kind of work😉

Top job John, very striking!

 

[Old Mod]

Really effective John, looks kool. 🙂

Seems this craze from the states is starting to catch on here now, although they tend to use pebbles on wall.

 

[Flintstone]

Nice to see something a little different! Well done John for helping this damsel in distress

 

[Albert]

Nice work John🙂

 

[Slippery]

@timeless john , how did you finish the exposed edges?

 

[Time's Ran Out]

@timeless john , how did you finish the exposed edges?

2 of the 6 edges were glazed.

 

[Spare Tool]

Great job John, nice wrap round corners 😉 ..just done a hexagon hall and porch floor myself and it really does batter the brain on the set out..

 

[GoneGuy]

Nice work John, very striking

 

[Andy Allen]

Very nice....

 

[Wishiwasatoptiler]

SWEET.

 

[Simon Dale]

How big is that Carp Andy🙂

 

[Spare Tool]

How big is that Carp Andy🙂

Slightly off topic and not even my thread 😉 but was just short of thirty mate, caught from Woodlakes in Norfolk...where I'm going back to Easter weekend 😀

 

[Qwerty]

What grout was used on this job? Curious as the some of the joints look patchy and uneven in a few places and a I see some haze remains in the pics.

I feel for the poor glazier who may have to change that pane of glass in the future 😱

 

[Time's Ran Out]

The grout hadn’t dried fully at this stage but I certainly found the Bal micro max supplied a difficult grout to use.
As for the glass it’s grout haze from the sponge!
We try our best!

 

[Dougs Third Go]

very different! I like it a lot 🙂

 

[Qwerty]

The grout hadn’t dried fully at this stage but I certainly found the Bal micro max supplied a difficult grout to use.
As for the glass it’s grout haze from the sponge!
We try our best!

I don't use BAL grout and I won't be looking at that.
I was referring to the removable UPVC beading being blocked off by tiles.

 

[Time's Ran Out]

Yes agree!

 

[Dumbo]

@timeless john I would of cut that basin waste off a bit shorter . Getting in the way .

 

[Slippery]

@Cat
Who makes the tiles and who sells them?

 

[Time's Ran Out]

@timeless john I would of cut that basin waste off a bit shorter . Getting in the way .

I’am a Tiler!
Got the marks on my head to agree with you.

 

[Qwerty]

Hacksaw?