Chipboard floor

[Stef]

I'd be interested to hear everyone's thoughts on this too.. My understanding is that it's unnecessary, but I've been wrong before.. 😉

I think Ditra is unnecessary, I would over board this with Hardie & that would be enough.

 

[rj1884]

Hello all.

i know this is an old thread I started a while back but I went to see a job. New build with 22mm chipboard in 2 upstairs bathroom floors. Both floors are having marble tiles fixed, not massive areas. I'm planning to overboard the floors. It's been previously mentioned that to then put ditra on top of the hardie is unnecessary when using porcelain tiles. As marble tiles are being used in this situation would people recommend putting ditra down as well to be on the safe side.

many thanks

 

[Ian]

Hello all.

i know this is an old thread I started a while back but I went to see a job. New build with 22mm chipboard in 2 upstairs bathroom floors. Both floors are having marble tiles fixed, not massive areas. I'm planning to overboard the floors. It's been previously mentioned that to then put ditra on top of the hardie is unnecessary when using porcelain tiles. As marble tiles are being used in this situation would people recommend putting ditra down as well to be on the safe side.

many thanks

Any UFH?

 

[Kevboy]

I would use Ditra if fixing stone tiles but don't think its necessary for porcelain. I've never primed ply prior to tiling and never had a problem, adhesive always sticks like muck to a shovel.

 

[White Room]

Sovereign Porcel Flex needs priming on ply....

 

[Qwerty]

I would use Ditra if fixing stone tiles but don't think its necessary for porcelain. I've never primed ply prior to tiling and never had a problem, adhesive always sticks like muck to a shovel.

How do you deal with the issue of expansion/ contraction of the ply? And how can you guarantee your work when adhesive manufacturers state that the ply must be primed? Do you use a SPF adhesive for tiling to ply or a two part?

 

[beanz]

How do you deal with the issue of expansion/ contraction of the ply? And how can you guarantee your work when adhesive manufacturers state that the ply must be primed? Do you use a SPF adhesive for tiling to ply or a two part?

Is this a new thing!?! Adhesive manufacturers used to say NOT to prime the face, only sides and back of ply.
As for guaranteeing his work. He doesn't have to follow anyone's instructions, he just has to be willing to put it right at his own expense, if it fails.

 

[Qwerty]

No, Beanz, I never said it was a new thing.
Not all manufacturers state ply must be primed, but alot do now. No come back if the individual manufacturers guidelines are not followed.
I personally prefer to fix tiles with the intention of them staying down and not having return to fix failures, but each to their own.

Hello all.


i know this is an old thread I started a while back but I went to see a job. New build with 22mm chipboard in 2 upstairs bathroom floors. Both floors are having marble tiles fixed, not massive areas. I'm planning to overboard the floors. It's been previously mentioned that to then put ditra on top of the hardie is unnecessary when using porcelain tiles. As marble tiles are being used in this situation would people recommend putting ditra down as well to be on the safe side.


many thanks

But to keep this on topic.........before we can answer this question, Bri correctly asked if UFH was being fitted. I would personally Ditra either way. How solid are the floors? Ditra can be laid directly to exterior grade chipboard so long as it is free from deflection and securely fixed.

 

[rj1884]

Thanks for your reply. There's no UFH going over the chipboard. The floors are solid.

 

[AliGage]

De-couple stone each and everytime