Please help - recent floor tiling job but grey grout instantly turning white - Tile Advice

[tjmerwanji]

Hi guys,

I really need your help! I have just had a tiler install tiles throughout my house over the last week, with grey grout everywhere. He grouted the tiles only on Friday I believe and having looked at them over the last few days, all the grout is slowly and steadily turning white (into a chalky colour - picture attached below).

I'm literally stuck as I'm not sure where it's coming from. I've read about salt efflorescence and I'm starting to think it's that, but better yet what can I do about it as a matter of urgency? I tried rubbing the grout with a damp cloth and temporarily it removes the whiteness then just turns grey again after 5 minutes or so. With other deadlines in the house looming I just wanted to know if any of you guys had any ideas of what I could do? There's a photo attached to illustrate the problem.

PLEASE HELP!

THANK YOU!

 

[Mike]

that may well be the natural colour of the grout after drying out. grout always looks darker when wet. still looks dark to me in the pic tho

 

[tjmerwanji]

Thing is on the corners it's a deep grey and doesn't seem to be changing. It's just in the middle it's turning whiteish (kinda chalky) and from what Topps Tiles have been saying, the deep grey is the colour...

Any way to rectify that? Regrout, pen, grout residue remover??

 

[DHTiling]

Was it flexible grout... looks like latex leaching from over washing or washing to early.

 

[peckers]

Is this the wall all floor?
what substrate is it on?
what adhesive was used?
What grout was used?

ok its the floor just noticed.

 

[Mike]

you need to let it all dry out and then take a look again. if there's still 2 shades it will be hard to rectify it. if you put a colour pen on it both shades would change again. as for re-grouting i'd not do that till i know what caused the problem initially.

 

[The D]

try using Cement, Mortar and Efflorescence Remover.

 

[Bathfix Bob]

All the bathroom floor tiles I do does this, I use Webber flexible grout (grey) and a flexible additive, it looks fine when wet but dries a uniform light chalky grey but looks okay and never had any complaints.

I wipe off carefully with a damp cloth about half an hour is this too early?

 

[Daz]

I know we are talking about grout discolouration, but is it the camera angle or are the grout joints uneven and tapered too?
Pictures don't always illustrate the issue clearly. Where are you? I'm sure there must be a member on here that is local to you and prepared to find a few minutes to take a look and provide some advice.

 

[tommyzooom]

I think it is too early to judge, I believe it is still drying out, and will all dry to the lighter colour in another couple of days

 

[tjmerwanji]

I live in the sorta Greater London, Wimbledon area. Anyone around?

Also the tiler has left a lot of thick groat near the walls and I have a feeling due to the thickness and size it's not going to change colour, which would make the grout colour different throughout.

I'm not a tiler or anything and I didn't want to seem too fussy to the tiler so just left him to it. Unfortunately it's gone wrong and I'm panicking as can't really put furniture in the house till it's sorted can I?

With regards to the tiling, spacers were used throughout. Does it look bit bent? Can post other pictures if it helps?

Thank you all guys...for someone who's a natural worryer I really appreciate it!

 

[tjmerwanji]

Also has this got something to do with it:
Broken Link Removed

 

[jay]

dont think its efflorescense as this normally happens over a longer time period would help if you could give us some more information reg substrate adh ect primers
any more pics would help

 

[heavytrevy]

Id wait 2 weeks to let the grout dry
If its still patchy after that im betting the tiler grouted before the adhesive had fully dryed.

Trev