So here’s a
bathroom I’ve just completed in Surrey, it’s part of a much bigger project which has been running for a couple of years now, and will be several more months before it’s completed.
This Is the master ensuite and probably the largest bathroom I’ve done to date with a footprint of approx 6.5m x 7.5m
The material is a Florim 3.2m x 1.6m, it was an almost total solo install and was quite a challenge.
Obviously I had help taking material up to the room and I did have help for fitting of four of the panels, the rest however I completed on my own.
All adhesives and grout were supplied by Isomat.
AK25 on floors and AK22 on walls.
The two ends of the shower side walls are 8mm wide mitred pieces full height to avoid the use of tile trim.
The shower is 2.1 x 1.4m and is enormous, it’s fitted with Kerdi line linear shower gulley.
Floor tiles are 800 x 800 and having four different floor levels to work to made it challenging, hence not all floor reflections are exactly perfect.
View attachment 111259
View attachment 111260
View attachment 111261
View attachment 111262
View attachment 111263
View attachment 111264
View attachment 111265
View attachment 111266
View attachment 111268
View attachment 111269
View attachment 111270
View attachment 111271
View attachment 111275
View attachment 111276