need to cut a 65mm hole - TilersForums.com

[howard]

hi guys
i need to cut a 65mm hole in a porcelain tile ive checked out the 365 drills but its not worth buying for a one off job any ideas how to do this
cheers
howard

 

[Olz]

Hire shop maybe ?

Or a very nice tiling friend in your area who may have one he / she could lend you?

Oli

 

[NickH]

How tidy does it have to be ? If its going to be covered you could use a 4 inch grinder to cut through from both sides in an asterix pattern, if you know what I mean, and try to nibble the rest out.

 

[howard]

does anybody have 1 in the manchester area i could borrow pretty please

 

[DHTiling]

Just price the hole cutter in with the job..........

 

[howard]

How tidy does it have to be ? If its going to be covered you could use a 4 inch grinder to cut through from both sides in an asterix pattern, if you know what I mean, and try to nibble the rest out.

its for a flush button on a toilet i have about 5mm to play with

 

[brian c]

I agree with Nick,use a grinder or set out to half the hole with two tiles if its not too late.

 

[howard]

Just price the hole cutter in with the job..........

already on the job dave the customer has asked me to do a few extra jobs and i have told him to pay me a day rate

 

[Olz]

Just price the hole cutter in with the job..........

Cousin is a Pluber and Gas Fitter, he often does this, if the tool he needs is expensive he sacrifices some profit margin, but next time he needs it he has it so no biggy really.

He has some expensive kit for gas flow testing and stuff, all of the cost is absorbed into jobs here and their, He just whacks stuff on the credit card and pays it off after the job, earns cashback / loyalty points on the credit card too.

 

[DHTiling]

Then get the customer to order the hole cutter if they want it done......then they might be kind and give it to you once done......