I'm planning to diy lay some plank wood effect tiles, size 114x20 and would appreciate advice in terms of what I'll be doing
These are 9mm porcelain rectified tiles, so I'm thinking to go with a 3mm grout line, is this ok?
As these are large format tiles I'll be using a 10x20mm notch trowel, is this ok?
The dimensions of the room are 3.35 width by 6.87 length
I'll be laying the tiles across the length of the floor.
Should I go with a random layout i.e use the offcut from the last row for the next row? or a 1/3 running bond?
Re the 1/3 running bond if I've understood correctly the first row will be laid down as full lengths the second row will be 1/3 and the third row will be 2/3 and the forth will be back to a full length tile, is this correct?
Any advice would be welcomed
These are 9mm porcelain rectified tiles, so I'm thinking to go with a 3mm grout line, is this ok?
As these are large format tiles I'll be using a 10x20mm notch trowel, is this ok?
The dimensions of the room are 3.35 width by 6.87 length
I'll be laying the tiles across the length of the floor.
Should I go with a random layout i.e use the offcut from the last row for the next row? or a 1/3 running bond?
Re the 1/3 running bond if I've understood correctly the first row will be laid down as full lengths the second row will be 1/3 and the third row will be 2/3 and the forth will be back to a full length tile, is this correct?
Any advice would be welcomed