Grout 3000 limestone problem
- Thread starter beanz
- Start date
W
White Room
Give Tilemaster a call to see if there been any other issues....
P
Peter
Every brand of Limestone grout I've used has been a different shade from ivorys to browns to greys.
Yeah, I was going to ring them today, but the customer was around, and I didn't want to be over-heard.. They've not said anything yet, so hopefully it's not a big problem. I think I'll stick with patchy weber from now on lol!
D
Dougs Third Go
I tend to use the jasmine a lot where once I would have used another brand of limestone, personally I can't fault Tilemaster addy and grout.
S
Spud
the limestone is more of a portland colour as opposed to light stone beige if you know what I mean
M
mev
same here mate Portland colour
Thank you for the above comments, it is very useful for us to here the feedback from fixers. We do take feedback from fixers very seriously, we listen and where possible we will implement change based on feedback. Tilemaster has grown significantly over the past few years and a feedback from fixers has played a major part in our growth.
In regards to the Limestone grout, I am aware that our shade of Limestone is different from most in the market. When myself and my old man were developing the range of colours around 3 years ago, we decided to try and base our shade of Limestone on a true natural Limestone colour. On doing research we found there are many different shades of Limestone but most are an off white colour, almost like a dirty, browny white. That is what we tried to create and I agree with the above comments likening it to a Portland colour, I often describe the colour as a light mushroom type colour.
The above comments from Beanz about it looking a touch blue are a concern and I wonder if something else is contributing to it? We make 1000kg batches and prior to bagging off the mix, the blend is actually mixed up and forced dried so that we can compare the cured colour to the "control" colour. Every batch of Grout 3000 is colour matched so our consistency on colours should be very good.
To all fixers using Grout 3000, I would be happy to post you sample swatches of Grout 3000 so that in the future you will know exactly what colour you are getting. Anybody interested, please PM me directly and I will arrange for the swatches to be posted.
The comments under another topic in regards to Rapid Setaflex White setting too quick are also taken on board and whilst it disappoints me greatly to read them, we will take immediate action.
Thank you for everybody's support and please keep the feedback coming. Have a lovely Easter to all,
Best Regards
Mark
In regards to the Limestone grout, I am aware that our shade of Limestone is different from most in the market. When myself and my old man were developing the range of colours around 3 years ago, we decided to try and base our shade of Limestone on a true natural Limestone colour. On doing research we found there are many different shades of Limestone but most are an off white colour, almost like a dirty, browny white. That is what we tried to create and I agree with the above comments likening it to a Portland colour, I often describe the colour as a light mushroom type colour.
The above comments from Beanz about it looking a touch blue are a concern and I wonder if something else is contributing to it? We make 1000kg batches and prior to bagging off the mix, the blend is actually mixed up and forced dried so that we can compare the cured colour to the "control" colour. Every batch of Grout 3000 is colour matched so our consistency on colours should be very good.
To all fixers using Grout 3000, I would be happy to post you sample swatches of Grout 3000 so that in the future you will know exactly what colour you are getting. Anybody interested, please PM me directly and I will arrange for the swatches to be posted.
The comments under another topic in regards to Rapid Setaflex White setting too quick are also taken on board and whilst it disappoints me greatly to read them, we will take immediate action.
Thank you for everybody's support and please keep the feedback coming. Have a lovely Easter to all,
Best Regards
Mark
T
Time's Ran Out
Great response Mark.
Its good to have this type of reply from the horse itself!
Limestone is a colour I personally prefer in most cases however I stopped using Bal for the exact reason of this thread. Patchy drying.
Also it could take 3-4 days for it to fully dry to the right colour.
I for one will definitely try your 3000.
Its good to have this type of reply from the horse itself!
Limestone is a colour I personally prefer in most cases however I stopped using Bal for the exact reason of this thread. Patchy drying.
Also it could take 3-4 days for it to fully dry to the right colour.
I for one will definitely try your 3000.
Cheers for commenting Mark. I find Portland cement to be more of a blue grey, than a browny off-white, so maybe we see the colours a little differently!?! I've used an Ardex Jasmine before, and that was pretty close to what I'm looking for, so perhaps your jasmine will be better next time.. A swatch would be very handy mate, so I'll pm you my details. Thanks for that! 😉
M
mev
Thanks mark for the swatches
There are similar tiling threads here
- Sticky
Featured Threads
-
- F
- W
-
- I
-
-
-