Make life easy, search the forum.

cut

In graph theory, a cut is a partition of the vertices of a graph into two disjoint subsets. Any cut determines a cut-set, the set of edges that have one endpoint in each subset of the partition. These edges are said to cross the cut. In a connected graph, each cut-set determines a unique cut, and in some cases cuts are identified with their cut-sets rather than with their vertex partitions.
In a flow network, an s–t cut is a cut that requires the source and the sink to be in different subsets, and its cut-set only consists of edges going from the source's side to the sink's side. The capacity of an s–t cut is defined as the sum of the capacity of each edge in the cut-set.

View More On Wikipedia.org
  1. H

    need to cut a 65mm hole

    hi guys i need to cut a 65mm hole in a porcelain tile ive checked out the 365 drills but its not worth buying for a one off job any ideas how to do this cheers howard
  2. D

    Clean cut around window trim

    Hi, Im looking for any tips on how go acheive a clean cut around a window where the tile and trim butt. At the moment when ive cut the tile around the window when i place the trim up against it sometimes 1. the cut isnt perfectly straight and 2. Almost always has very small chips where the wet...
  3. B

    marking tiles ready to be cut

    some of you may find this useful, i work with a few new guys who are having problems, marking tiles around obstacles, so i made this little pdf to help them its a method i use when fitting vinyl tiles from my previous life as a vinyl tiler, using this method you can mark around almost any...
  4. C

    How to cut tiles around an arched window

    Hi, I've been tiling for 9 months and have finally encountered an arched window. Any advice on getting a nice cut around the arch? (don't need to go inside it). Was going to nip some plastic corner trim until I could bend it around the arch but this is proving difficult as well. Window is 970...
  5. B

    Free E Cut Blade With All Fein Multimaster Kits

    We are giving away a free Fein E Cut 44mm Bi Metal Blade worth £16.99 with every Fein Multimaster Order. This offer is strictly first come first served as there is limited availability! Neil
  6. A

    can you cut curves in travertine tiles?

    hi there, is it possible to cut travertine tiles on a curve? the tiles are 13mm thick and 200 x 100 in size.
  7. T

    cut tile butted up to tile trim

    what do you guys do when you have to cut a tile that buts up to the back (flat side ) of the tile trim due to wall layout i have no option but to do this or would you peice (one tile) directly above the bath for the tiles to work out without cuts to the trims ,i think that wouldnt look...
  8. J

    What end for the cut?

    Hi Basic question for the experts. I am about to tile my bathroom and I am not sure if the tile I need to cut should be the one at the top or the one at the bottom.:huh2: I have measured the wall and I need to cut one of the tiles to fit. Cheers Jackson
  9. D

    Chipped edges/laser cut

    Had a real slow day today. Installing floor tiles in a small bathroom. The tiles were seemingly laser cut. They were a sort of grey pattern printed on a white porcelain like material. The grey seemed very easily damaged to me revealing the white backing. I spent a bit of time sorting the...
  10. T

    How to cut Glass tiles

    Hi, I have been asked to quote to tile a bathroom with Porcelanosa glass tiles, the customer says they are about 300mm x 600mm, ceramic with a ridged glass facing. I haven't come across these before, I am concerned the glass face will chip off. Help please. Come on you guys, someone must have...
  11. C

    D CUT TD-080 wet cutter

    Thinking of buying one of these,has anyone used one or got any views on it,my mates got one and he rates it for big porcelin tiles,also how much are they and where can you get one,cheers for any info.
  12. G

    cut round bog

    whats the best way to cut upto the toilet? Ive cut three in the last 2 wks looked fine when finshed but took too long. cheers
  13. P

    best way to cut slate around fireplace

    Hi guys I know this is basic but what is the best way to cut 1 inch slate around fireplace. As you can see in diagram 1 the carpet has been cut where the client had laid the slate in loose and then asked the carpet fitter to cut around the slate when he laid the carpet LOL but as you can see it...
  14. J

    best way to cut 15mm granite for floor tiling !....

    looking for best way to cut 15mm thick granite tiles for bathroom floor and also best adhesive to use
  15. G

    Toilets - Tile underneath or cut round

    Probably a very daft question but I went to quote on a bathroom floor and the customer is insisting that the tiles gop under the toilet with the toilet sitting on top of them. My question is - is that right. Im a bit reluctant to sit a solid toilet on top of solid tiles as movement is...
  16. E

    cutting disc for wet cut machines

    Whats the best cutting disc for a wet cut machine, i have a sima perla radial arm saw, disc size 22-20mm inner bore, disc outer 230mm, and want a disc thats going to last.
  17. P

    Cut Door frames or Tiles?

    Tiling hallway (10mm tiles) with several doors involved, what are your prefrerences with regards to cutting. Doorframes or Tiles??? any Tips greatly appreciated. Thanks for all replies to date. fantaststic learning tool! Regards Pompey
  18. G

    A question for Gaz@Topps Tiles r.e. D cut wetsaw

    Easy mate, New to the board, just intrduced myself on the new members page, noticed that you work for Topps and have mentioned the D cut wetsaw in other posts... hope you can help. I bought on of those D cut wet saws from Topps Tiles in Oxford a while ago. Great machine... lovely to use. I...
  19. V

    trying to cut ceramic floor tile, shattering

    Hi I have just started tiling I am trying to cut my tile with the wet cutter and it keeps shattering. What am I doing wrong. Many thanks.
  20. Dan

    How Do You Cut Thick Ceramic Floor Tiles?

    In most cases providing they are just ceramic you may be able to use a good quality 'dry' cutter, if it's a tough tile or is something other than ceramic, maybe porcelain glazed or even fully bodies porcelain or even those such as stone and marble etc, you will probably need to use a wet disc...
This website is hosted and managed by www.untoldmedia.co.uk. Creating content since 2001.

UK Tiling Forum Stats

Threads
66,601
Messages
866,709
Members
9,513
Latest member
05jtaylor
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock