Search the forum,

Discuss Wetroom tray setting out in the Canada Tile Advice area at TilersForums.com.

Reaction score
71
Points
258
Location
Ruislip
Please check the tiles to ensure that there is no significant variation in size from tile to tile before you start. Please also check that the glaze is good and reaches each of the edges.

Are you sure that they are 315mm? They are supposed to be 331mm I think . . .
 
Reaction score
58
Points
258
Location
Aberdeenshire
Please check the tiles to ensure that there is no significant variation in size from tile to tile before you start. Please also check that the glaze is good and reaches each of the edges.

Are you sure that they are 315mm? They are supposed to be 331mm I think . . .

Will do. I take there are known quality issues with these tiles 😬? That pretty much sums up my year! Yes, these are 330 or thereabouts, my error.
 
Reaction score
71
Points
258
Location
Ruislip
Ummmm - how do I put this . . . Yes!

Search BCT on here and see for yourself. They went out of business earlier in the year. When did you buy the tiles? Make sure that you have plenty before you start. Lots of tile retailers bought their clearance stock - at very low prices. But there is obviously no new stock in distribution
 
Reaction score
58
Points
258
Location
Aberdeenshire
Fml! I’ve had two packs open and nothing has sprung out, but I’ll be looking a bit further tonight before I start. All the same batch though, and if I remember correctly I bought area+11% and a spare pack (1m2) for good measure.(9m2 overall)

We searched for weeks before settling on these. If they are crap they ain’t getting laid, I’ve put too much into the subfloor, heating, prep for these to risk a bad job. Cost would be a pain, but not half as bad as deciding on new tiles with she who must be obeyed!
 

Boggs

TF
Esteemed
Arms
Reaction score
4,729
Points
1,118
Location
Uk
I thought they would be worse than they were to be honest.

666A174A-4DC7-4A32-9EBA-64C745872FC0.jpeg
 
Reaction score
58
Points
258
Location
Aberdeenshire
ive invested far too much time and money into my wetroom (and research) to finish it off with something I’m going to be using every day, and search around for cracks and defects every time I use it, to get any kind of enjoyment out of them.

It’s been weeks since I bought from Homebase, but going to make every effort to return them.

It seems you guys fit them for customers, so I guess it’s not all doom and gloom, but I can gaurentee you, I bet not one of you would knowingly buy these to fit to your own wet room, so really not much point in quizzing you fine fellows for any should I/shouldn’t I questions.

That’s the setting out question answered also 😂
 

Boggs

TF
Esteemed
Arms
Reaction score
4,729
Points
1,118
Location
Uk
I would say same tiles wrongly advertised as porcelain. :(
 

Reply to Wetroom tray setting out in the Canada Tile Advice area at TilersForums.com

There are similar tiling threads here

Good morning all. After a little advice. I'll post pictures a bit later. However.... The...
Replies
6
Views
805
Hi all! Just wondering what the best advice is for book-keeping? Been self employed now for a...
Replies
1
Views
574
I had a small leak in the main water line before the stop tap in my 1950s house. The copper pipe...
Replies
1
Views
624
10 Tiling Tips for Fixing Tiles to Bathroom Walls = From UKTilingForum.co.uk There are a few...
Replies
1
Views
691
Hi all. Just wanting some advice and wondering what the pros in here are using nowadays for...
Replies
2
Views
566
Please visit our sponsor websites, they keep the forum free to use!

Advertisement

New Tiling Questions

Replies you've not seen

Top