Sigma Manual Tile Cutters - TilersForums.com

[Old Mod]

Not Scottish are you?

 

[Waluigi]

Setting the height makes all the difference. Previously I was getting quite a rough edge on my biscuit. Now it’s set up properly, it cuts flawlessly. Identical to the Rubi.

Also had a proper look at lining up the tile with a pencil mark. Yes it’s going to take a bit of getting used to. One way I have found is to mark the pencil line down the biscuit so it lines up with the breaking bar.

 

[J Sid]

identical to a Rubi, now that's going to start some arguments.... You must still not be using it correctly

 

[Waluigi]

I meant purely how the biscuit looks after the cut. It’s idential to how the Rubi leaves it.

I’m not saying that the cutters are the same. I’ll leave that judgement for now. Too early. Great cutter so far though. I only got it on Tuesday

 

[Wishiwasatoptiler]

I do have a very basic tip that everyone will already know.....

The measuring bar can be stored on the main tile body. It slots in and screws on.

Not on my little 2G, just flops about the van

 

[Blunt Tool]

Setting the height makes all the difference. Previously I was getting quite a rough edge on my biscuit. Now it’s set up properly, it cuts flawlessly. Identical to the Rubi.

Also had a proper look at lining up the tile with a pencil mark. Yes it’s going to take a bit of getting used to. One way I have found is to mark the pencil line down the biscuit so it lines up with the breaking bar.

Setting the cutter properly is probably the most important for flawless results, I agree you can compare cuts with Rubi on biscuits but just wait till it’s full on porcelain the Sigma goes into overdrive

 

[Waluigi]

Cheers, yeah Ceramic wasn’t really the reason I bought a sigma as the Rubi can cope well with ceramic.

That measuring bar is lovely on the sigma though regardless of which material you’re using.

 

[Waluigi]

Guys- does the Montolit mosaic Matt fit the Sigma ?

 

[Italy]

finally a trend that I missed ..................................................................................................................................................................................................................................................

 

[Italy]

go and buy a pallet of tiles
of various models, sit comfortably, better on Sundays
so do not waste time and start cutting, you will see that every type
of tiles will need to adjust the sigma.
this is what happens every day .....
only practice will make you understand, every tiler has a style of cut.
I just wanted to say something, CLEAN TOOLS !!!!!!!!! ahaha

 

[Blunt Tool]

Guys- does the Montolit mosaic Matt fit the Sigma ?

Think I remember someone on here saying it did

 

[Italy]

Think I remember someone on here saying it did

i

 

[Bopster]

Well, that’s was interesting. I just spent the last hour cutting various thickness, hardness and texture porcelain with my new cutter.
I now understand the fuss about sigma being best, it’s effing amazing. Wasn’t 100perfect on heavily textured but on 10mm polished or matt porc it’s just incredible. Managed to cut 600 x 300 down to 10mm rips with ease
Cheers lads for suggesting it

 

[Old Mod]

i

Haha you can not help yourself Antonio can you!

It is in your personality, you must reply! Haha

 

[Blunt Tool]

Use blue paper towels to push thru the handle hole to get rid of the gunk that builds up, that’s MY tip!