You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser.
layout
A keyboard layout is any specific physical, visual or functional arrangement of the keys, legends, or key-meaning associations (respectively) of a computer keyboard, mobile phone, or other computer-controlled typographic keyboard.
Physical layout is the actual positioning of keys on a keyboard. Visual layout is the arrangement of the legends (labels, markings, engravings) that appear on those keys. Functional layout is the arrangement of the key-meaning association or keyboard mapping, determined in software, of all the keys of a keyboard: it is this (rather than the legends) that determines the actual response to a key press.
Modern computer keyboards are designed to send a scancode to the operating system (OS) when a key is pressed or released: this code reports only the key's row and column, not the specific character engraved on that key. The OS converts the scancode into a specific binary character code using a "scancode to character" conversion table, called the keyboard mapping table. This means that a physical keyboard may be dynamically mapped to any layout without switching hardware components—merely by changing the software that interprets the keystrokes. Often, a user can change keyboard mapping in system settings. In addition, software may be available to modify or extend keyboard functionality. Thus the symbol shown on the physical key-top need not be the same as appears on the screen or goes into a document being typed. Some settings enable the user to type supplementary symbols which are not engraved on the keys used to invoke them.
Hello
I'm new to tiling my first flooring job it's 42sqm in 600x 200 floor tiles (wood effect)
My room starts at front door where I'm hoping to start"?" To then go right through door into living room then left into dining room ans left to the kitchen! It's like a big u shape
I do have a floor...
Hi,
I'm tiling the floor of a wetroom and would like some advice on the best way to lay the tile.
I plan to use 300mm x 600mm tiles, and there is a 800x1100 wet room form installed with a 300mm linear drain.
Because the wide of the form has been trimmed, it doesn't exactly match the tile...
I have a small kitchen with a floor area of 265cm x 140cm with the door recess adding another 20 cm to the length & I have tiles that are 120cm x 20cm. I will be coating the floor with an SBR primer first because of the bitumen on there & I have some old glue residue to remove first from stuck...
Hi there
I’m new to Tile Forum and joined to get professional opinions because I really need advice. We laid 100m2 900 x 900 tiles internally in a perfect square formation transitioning three rooms with a 2mm grout line. The idea was to seamlessly transition this to the raised patio outside...
Hi guys, im doing a small downstairs cloakroom with 600 x 600 terrazzo tiles. I cant decide on the layout. The width is just under 1.1m so i can either go 1 grout line up the middle with small cuts on 1 side of each tile or 1 full tile up the middle with a cut tile on each side. Has anyone done...
Hi all.
Just about to embark on a small job approximately 4 sq metres of 10 X 10cm Victorian chequered diagonal with a black border. I want to make sure that I have a white half diagonal meeting a black square border. Must have it from left to right and top to bottom. Anyone have any layout...
Hi all. So I am trying to plan the layout of tiles for my bathroom. Figured out the horizontal lines but cannot figure out the vertical cuts. The window wall which has an off centre window I think I shall be ok putting a tile in the centre as the wall will only take 3 tiles. See image attached...
Hi guys -- need some aesthetic advice here. I'm tiling a wall in my small bathroom with subway tiles (75x150mm). One half of the wall is taken up by a fitted bath, the other with a wooden countertop with a sit-on basin. The height difference between the bath and the countertop is such that one...
Should I use spacers and anti-lippage system inserts when I cut/layout my floor tiles?
I ask, having just finished a bathroom floor using a leveling system for the first time. I used the raimondi system on 12" square tiles and the tiles came out very level but my grout lines shifted as I...
Good day everyone. First time listener, first time caller.
I've been tasked with tiling an odd-shaped front entryway, and I need a little advice on tile direction. Please take a look at this photo and share your thoughts on whether or not to use the A line or B line. I think the B-line gives a...
HI,
Walls are prepped, have the right materials and tools, but still debating the layout on edges.
There are three groups of mockups for the tile layouts at the cabinet ends below.
I would really appreciate some input for which method is advisable and why?
Most look good to me. I feel the...
Just reached the point of tiling the floor of my wetroom. It has an Impey Aquadec linear 2 former with waterguard tanking membrane. The former allows for a natural flow towards the drain from both ends so the tiling just follows the former but I'm uncertain about the correct way to layout the...
Hi, I’m going to tile inside my shower with 1200 x 1200 tiles, if I sit the first tile on the tray, then the next on top of that, that leaves me with a cut of 240mm going into the ceiling. Would I get away with this or should I start with a 120mm cut at the bottom then again at the top to even...
Hi everyone, I'm new here, been reading loads of posts and getting some great tips.
I am tiling the three walls around my bath to the ceiling using skinny tiles that are 6cm x 24 cm, laying them in a vertical pattern. Then with a border around the room.
Do the same rules apply for layout as...
Any Victorian Tile Specialists out there I would be very grateful for some advice!
I have bought a job lot of tiles from Ebay- originally was not considering an intricate border but given I have the tiles I am going to try..
Dilemma I have is when dry-laying (photo attached), the narrow bit at...
So just laying out some white Metro and the window is ever so slightly offset, do I 1. Have a small piece beside the window or 2. Work out from the window and hide e a short tile behind the tap. Will be using light grey grout.
Hello all,
I have all the tile I need and the materials to redo my bathroom shower. This is my first time tiling and I have already completed the shower floor.
I need help\advice on how to lay the tile on the shower wall. I am using 12 x 24 inch tiles with 1/8 inch grout lines. My shower wall...
Hello!
I am about to lay a walk in shower with 120cm X 20 cm tiles.
In general the room will be a "brick" type layout.
The walk in shower is closed on 3 sides and borderless on the front.
The drain is a hole type drain which is off center, which means I will have to generally cut the 'v...
Hi all . I have been given boxes of Rikett Vinyl Quartz Floor Tiles , 300mm x 300mm approx 2 -3mm thick enough for me to lay my kitchen floor what I need to know is do I need to remove old self adhesive floor tiles first or can I lay straight on top or do I need to remove to bare the concrete...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.