Screed leveling / repair for re-tiling. - TilersForums.com

[bwel]

Hi,

My tiler has taken up old tiles in our conservatory but some of the screed has come up from the UFH and needs levelleling before tiling. He's working on the rest of the house and has not come to a conclusion on the levelling. Picture below.

Initially we talked about making up new screed, but he has also mentioned floor leveller.

I'm a bitconcerned about having a mix of materials and different expansion rates of them.

What are your recommendations ?

 

[Unused Account 1]

Shouldnt really lift tiles with ufh if can be helped as it should bring some of the screed with it if fitted right

 

[Unused Account 1]

I see its water ufh should be ok

 

[bwel]

Any thoughts on what to level with ?

 

[Unused Account 1]

If its a small area self leveller , if its bigger area mix up a bit of the original screed

 

[peteablard]

I'd self level it, fit ditra then tile. My concern would be your tiler not knowing what to do!

 

[Old Mod]

That looks like a layer of latex anyway that's come away.
I'd clean away any and all debris and loose surface, and if you have no height issues, prime to reduce suction and re latex whole floor.
Fit anti fracture mat like Tilemaster's and tile.
No need for something like Dural.
Should be straightforward decision for your fixer.

 

[hmtiling]

There are some off cuts of durabase in the corner!

 

[bwel]

We are tiling 175sqM overall, this conservatory part is 4x5m. It was build 15 years ago and had Screed, Latex, Amtico. Amtico was replaced with tile 10 years ago and now we are retiring with 80x80 tiles with Durabase Uncoupling in the whole house.

When these last tiles were lifted, some of the latex lifted with screed. The screed seems a bit weak / dry from the original mix and it needs a bit levelling now where the holes in the screed are (first post pictures).

Thanks for all the advice.

 

[Old Mod]

There are some off cuts of durabase in the corner!

Dural/Durabase.... Potatoe's/Potato's
Semantics