Search the forum,

Discuss Mapei S1 adhesive on ply- Help in the UK Tiling Forum area at TilersForums.com.

J

jason23

Hi Folks,
I'm about to do a wee tile job in bathroom. Putting 9mm ply down ( screwed thorughly ) and painting with Excel bond SBR first.

Now tle shop sold me Mapei S1 Keraquick rapidset. i didnt but the extra tub of flexi.

Ive just looked at the Mapie website and it says dont use on wallas and floor prone to extreme flexing or vibration (ie ) wood, fibre cement boards.

Now I'm confused!!!

Can I use this Keraquick s1 on ply or not?

Can anyone advise??

Advise much appreciated, starting work tommorow!

: )

Jason
 
D

DHTiling

Not on 9mm ply....use latex plus with it..:thumbsup:..if the ply was within bs standards then it would be fine..
 
J

jason23

Thanks Dave. OK, I will pop round and get the latex plus.
If I used 12mm would I get away with Keraquick on its own?

How much Latex plus do I mix in?

Muchos Gracius

Jason
 
D

DHTiling

maybe.....but just use the latex plus and it will be an S2 adhesive then....you mix the latex with the keraquick....no water..:thumbsup:
 
J

jason23

ahh. lucky I asked. Yes, the tile shop assistant didnt even hint at this.

Dave can you recommend a good flexible grout for me in grey?

Do Mapei do grout that utilises this latex plus mixing agent?

Ive had a few grouts crack on me and I'm gonna go flexy from now on.
 
J

jason23

great. Just got 6 Kg of Latex Plus.

The assistant at the shop informs me to mix 1.5 KG LP with 10 Kg bag of Keraquick.

Do you concur with this mix ratio Dave?

I'm sceptical because she says I should be using 6kg with a 25kg bag! I pointed out that makes no sense at all.
 
J

jason23

ive also been reading that drying time is v slow with Latex Plus additive? Is this correct? What dry time can I expect?

Thanks for the advise Dave, v much appreciated
 
D

DHTiling

Hi jason..

Here's the PDF for Latex plus...

Broken Link Removed
 
Last edited by a moderator:
J

jason23

OK, I have the definitive answers now. All the myths and nonsense were making me doubt the plain B&W Mapie bible.

Confidence restored.
:thumbsup:
 

Reply to Mapei S1 adhesive on ply- Help in the UK Tiling Forum area at TilersForums.com

There are similar tiling threads here

10 Tiling Tips for Fixing Tiles to Bathroom Walls = From UKTilingForum.co.uk There are a few...
Replies
1
Views
713
I had a small leak in the main water line before the stop tap in my 1950s house. The copper pipe...
Replies
1
Views
648
Good morning all. After a little advice. I'll post pictures a bit later. However.... The...
Replies
6
Views
860
Hi! I'm looking for some advice, I have laid some SLC (Mapei 1210) in our conservatory in...
Replies
5
Views
607
Please visit our sponsor websites, they keep the forum free to use!

Advertisement

New Tiling Questions

Replies you've not seen

Top