Only if you over apply. In the short term you may find it takes a little longer to dry but when it does dry the bond will be stronger. I'm presuming you're fixing ceramics? What size are the tiles?
Then you should be all good to go. Leave it as long as you can before grouting and don't exceed the bed thickness. As @whitebeam said tubbed adhesives require air to dry so it's imperative you leave it as long as you can. Best of luck with it.
Appreciate your help, Rich. It's been a good 15 years since I last did any tiling but wanted to help out my mother in law as she has been through a tough time lately.
Hi All,
We are looking for a tiler for potential tiling work in the Suffolk and Essex area.
We are also looking for anyone who is interested to do a tiling apprenticeship with us.
Anyone...
Hello
I plan to tile our bathroom with 60x60 cm tiles (8 mm thick) and the shower (because of the slope from all sides) will be done with mosaic tiles (5x5 cm).
After researching I came to the...
Hello,
I am about to waterproof an existing shower after taking out all of the old tiles and old mud waterproofing.
From what I see there is an existing drainage. The idea is to clean everything...
I recently visited an establishment and went to use the facilities and this was it! I was gobsmacked I thought it was so lovely. I love the pink tiles!