Going to look at a swimming pool

[Diamond Pool Finishers]

Tuesday that apparently the grout and adhesive has gone soft !!! What do you think could be the reasons ?? for this then ???

 

[beanz]

Any way moisture could've got to it before it set!?! Failed membrane? Too cold when fixed?

 

[Diamond Pool Finishers]

It's usually an indication that the pool Chemistry is not right,
A pool management issue .

 

[beanz]

It's usually an indication that the pool Chemistry is not right,
A pool management issue .

Really? Good to know.. Not that I'm likely to be tiling any pools. 😀

 

[Diamond Pool Finishers]

Never say never mate lol there are loads of pools out there that need tiling and e-tiling and renovation 1000's and it s all good work

 

[beanz]

I wouldn't know where to begin!?! I imagine that's a very different ball game.

 

[Chalker]

Used to do the heating on pools for a company called pine log in Derbyshire. The tilers took ages to do the bit at the waterline and above. Then below chucked tiles on without having to be as accurate.

 

[thompsonbrown]

It's usually an indication that the pool Chemistry is not right,
A pool management issue .

Totally agree with your answer to your own question. Used to work in water treatment so in my opinion it could be one of three things
1. Free chlorine. Look for signs of discoloured grout.
2. calcium CaCO3 checking the tds (total dissolved solids) & the temp of the water would give you an idea if this was the cause.
3. and most likely pH of the pool water.
In my opinion it's probably the wrong pH of the pool water.
If i was installing swimming pools (which i can't) I would carry a pH meter and a TDS test kit. with me. a DPD test kit would also be an advantage.

 

[Peter]

Water too soft and has decided to steal calcium from the grout?

 

[Diamond Pool Finishers]

Great replie there Mr Thompsonbrown !! you know your stuff.....