Dewalt D2400 wetsaw plus 700mm Rubi TX700N cutter - TilersForums.com

[manctiler]

Everything you need for cutting stone and porcelain at 600mm. Good condition, not used much, packing in tiling because of health reasons.

Rubi TX700N, it's a great porc cutter, cuts successfully every time. New about £340.

The Dewalt is the best wetsaw ever, nothing comes close, and I've used all sorts. It even cuts mats of stone mosaics, and ludicrously narrow cuts in stone and porc, all on the same blade. New about £860.

Sensible offers please. I'm in Manchester. You will need a small van with nothing else inside it I reckon, as they take up a bit of space between them. I think the case for the Rubi is 900 mm long, I will check.

£1200 total new, would like around £900 for the pair or £250 and £700 respectively, as they are in vgc, I'd say the equivalent of about 3 months daily use. No faults or problems with them. Will split.

 

[DHTiling]

A new Dewalt is only £789.60 Tradetiler Wet Tile Saws

Just saying you get an easier sale.

 

[Dan]

The rubi you should get about £200 - £250 for. The Dewalt about £550 - £600 I'd guess.

 

[Perry]

A new Dewalt is only £789.60 Tradetiler Wet Tile Saws

Just saying you get an easier sale.

or £756 from ITS

 

[DHTiling]

or £756 from ITS

Either way it still makes 700 a tad high for a used machine.

 

[Colour Republic]

Would be interested in both these buy sadly not at £900. PM me with what you would accept for them and hopefully we can sort something out

 

[Perry]

Either way it still makes 700 a tad high for a used machine.

yes i would think so i paid 599.99 for mine with a free leg stand some people are vat reg

 

[manctiler]

The rubi you should get about £200 - £250 for. The Dewalt about £550 - £600 I'd guess.

Ok that's £750-850, so I'll go for the middle option and say I will take £800. Also, thinking about it, they've probably had 2 months equivalent of daily use maximum. Done about 250 sq m of floors, porc and limestone.

There is a tiny bit of rust on some of the rollers, not a problem yet, but I have a spare set from Dewalt anyway, to include in the price, plus one or two Rubi wheels.

 

[manctiler]

I will take £575 for the Dewalt and £225 for the Rubi

 

[Gazzer]

You may be better off on Ebay.

 

[Dan]

Link us to the listing mate if you stick them on ebay.

Any VAT reg company would could buy the cutter for £599 like PJC did would be able to claim back 100 quid in VAT - brand new cutter then.

Stick a decent reserve price on them on ebay and link us to the listing here you'll get a few bidders then.

 

[manctiler]

strangely on ebay they are £1800 ! Some are more sensibly £776 though. I dont think most tilers are VAT registered are they? Anyway, I dunno how to use ebay but it's a thought.

 

[manctiler]

could someone from admin please amend the title to TX 700 N please?

 

[manctiler]

Hi, I've sold the Rubi now, the Dewalt I will do for £550


By the way, this has been used very gently. I only ever used on finger pressure to do the cuts. Also the pump was always in a separate bucket of clean water, so it is like new.

 

[manctiler]

Come on now folks, get your bargain wetsaw here!

07931-724627 Manchester