I’ve got a customer that had his kitchen tiled only 2 years ago. The tiles at the back of the cooker are cracked and discoloured due to the heat generated by their massive 6 ring gas cooker, and the grease from cooking. At the time he asked the tiler for epoxy grout, but the tiler just grouted with flexible grout.
The customer now wants the tiling done again. Some tiles are cracked, do you think I should use porcelain tiles with epoxy grout?
Also, the previous tiler ran a grout line where the floor changes from a timber substrate to a concrete one. I am guessing that all I can do is scrape out the grout and regrout with superflex w/j grout. I know that this will not be a permanent solution but will it be ok to do?
One more thing. I’ve just been on the Topps website and they are selling an epoxy grout float. I don’t need a special float.......do I?
Thanks
Sean
The customer now wants the tiling done again. Some tiles are cracked, do you think I should use porcelain tiles with epoxy grout?
Also, the previous tiler ran a grout line where the floor changes from a timber substrate to a concrete one. I am guessing that all I can do is scrape out the grout and regrout with superflex w/j grout. I know that this will not be a permanent solution but will it be ok to do?
One more thing. I’ve just been on the Topps website and they are selling an epoxy grout float. I don’t need a special float.......do I?
Thanks
Sean