Bulk buying screws for backer board - Tile Advice

[Flintstone]

Just wondered if anyone bought bigger quantities of screws for boarding floors ? I have a couple of large floors to board and the usual turbo gold screws only seem to be available in boxes of 100, any decent alternatives ?

 

[Dumbo]

Wedi screws come in a box of a thousand but probably pricey .

 

[Boggs]

I get all my screws from ironmongery direct, the Timco screws are really good and cheap.
I prefer them to turbo gold.

 

[hmtiling]

Just wondered if anyone bought bigger quantities of screws for boarding floors ? I have a couple of large floors to board and the usual turbo gold screws only seem to be available in boxes of 100, any decent alternatives ?

You using hardie Andy?

 

[Flintstone]

Yeah

 

[Bill]

I get my bulk from a trade depot called Stax - 2000 in a box - for a 25mm 4 - about £15 I think. or a Riesser Cutter for £24 for 1600 - It all depends on how good the flooring is as to which screw I buy.....

 

[Unused Account 1]

The plasterboard screws are fine very sharp and cheap ,there fine i checked

 

[Flintstone]

No good for flooring, only good for plasterboarding !

 

[Unused Account 1]

i dont use hardie much dont like it myself ,a plumber i use ashad a few issues with it on walls ,i prefer ditra for floors, just my preferance ,

 

[Bill]

i dont use hardie much dont like it myself ,a plumber i use ashad a few issues with it on walls ,i prefer ditra for floors, just my preferance ,

Hardie and Ditra are two different things

 

[Flintstone]

Very different products for different jobs. I'd never use it on walls.

 

[GoneGuy]

Have you got a local ironmonger shop near you as they will prob be able to give you a good deal on bulk

 

[Sean Kelly]

Reisser Cutter Pozi Screw Tub 4.0 x 25mm - https://www.toolstation.com/reisser-cutter-pozi-screw-tub/p57897

I use the above. Last time I bought them they were under £20. Now they are £26 for 1600

 

[On one]

I have used these screws for a number of years now,never had a dud screw yet and they don't jack up the Hardie when screwing in. Reisser Cutter Tub - 4.0 x 25mm - Pack 1600 | IronmongeryDirect - https://www.ironmongerydirect.co.uk/product/reisser-cutter-tub-40x25mm-pack-1600-768240

 

[Boggs]

These are great quality screws and can save you a few quid.

TIMco Solo Chippy Screw - 4.0 x 25mm - Pack 200 | IronmongeryDirect - https://www.ironmongerydirect.co.uk/product/timco-solo-chippy-screw-40x25mm-pack-200-703230