Tilers Forums Hall of Shame....

UK Tiling Forum; Established 2006

Welcome to the UK Tiling Forum by TilersForums.com, built in 2006 by Tilers, run by Tilers.

View all of the UK tiling forum threads, questions and discussions here.

Tilers Forums Official Sponsors

Re: Hall of shame....

Hi CC,

Some of the grout was so soft that it could be scraped out with a plastic scraper or something similar. There were a lot places where they grout had holes in it or was otherwise not filled for a flush and solid joint. These guys had used muriatic acid on the slab in an attempt to remove glue from a previous laminate floor, and all it did was ruin everything in the condo that was metal-the window frames, all the appliances, the locksets, the ductwork, etc.

I'll go look for some more photos.
 
Re: Hall of shame....

This shows how wet the mastic still was in places behind the tile. The tile had been set months before and the stuff never dried. You can also see the pan liner was sliced in the corners to avoid folding it, and the tile was running down over the pan liner.:mad2:
 
Last edited by a moderator:
Re: Hall of shame....

got a few pics coming soon when the customer e-mails them to me,went to do a regrouting job:huh2: on a shower cubicle and replace a few loose tiles,amazingly i found there wasn't even plasterboard behind the tiles but the wall had been sheeted with ply:yikes:,there wasn't any tanking either and this was done by a reputable bathroom company from the south side of glasgow:huh2:
 
Re: Hall of shame....

Well, something is wrong with my DVD unit on my computer and I can't get pictures off of the discs. :mad2: I'd like to finish the ones that I started, and also to find the shower we tore out several years ago that had tile set with mastic on top of WALLPAPER. Go figure!
 
Re: Hall of shame....

Here's one I started today....
Oddly enough, it took all day to get the floor up - only 12sqm.
I managed to get about a dozen off cleanly like this, the rest fought back, slicing my wrist and sending splinters into my arms :11:

The customer said she thought something was wrong, as the tiles "sang" when she swept them.

Floor lasted 12 years with no breaks - spot fixing: it's the future!
 

Attachments

  • 21012009006.jpg
    21012009006.jpg
    115.3 KB · Views: 283
  • 21012009007.jpg
    21012009007.jpg
    145.2 KB · Views: 258
Re: Hall of shame....

Dang it! And they could of centered those back wall tiles differently, as we all know. As not to have less than half a tile on either side. GoofBalls/ConArtists.
 
Re: Hall of shame....

Here's one I started today....
Oddly enough, it took all day to get the floor up - only 12sqm.
I managed to get about a dozen off cleanly like this, the rest fought back, slicing my wrist and sending splinters into my arms :11:

The customer said she thought something was wrong, as the tiles "sang" when she swept them.

Floor lasted 12 years with no breaks - spot fixing: it's the future!


ouch!!!!!!!!!!!
 
Re: Hall of shame....

Hey Rob Z.....

As we know, mastic is only good when used for kitchen backsplashes & shower ceilings. I try not to use it on shower surrounds, however......it has it's advantages in low doses.

It sucks to see someone try to "float" mastic, can't stand to float mortar anyhow.

Have Fun. Much respect for doing repairs. My only solution has been complete tearout, followed by precision construction. I won't do small fixits and such. No passion.

Again, Much Respect.
 
Re: Hall of shame....

Hey Lofty,

We didn't do any repairs on any of that work. We completely gutted both bathrooms and the enie kitchen and redid all of it. Those poor homeowners got a pittance back from the contractor after a lengthy legal battle. And that guy is still in business, do crap work and taking people's money. :incazzato:

I wish I could put more photos on here but my CD device on the computer is DOA. :cuss:
 

Advertisement

Thread Information

Title
Tilers Forums Hall of Shame....
Prefix
N/A
Forum
UK Tiling Forum
Start date
Last reply date
Replies
635

Advertisement

UK Tiling Forum

Thread statistics

Created
DHTiling,
Last reply from
bcd-87,
Replies
635
Views
25,429

Thread statistics

Created
DHTiling,
Last reply from
bcd-87,
Replies
635
Views
25,429
Back