New tiler buying a wet saw. Budget!!

[STINGRAY30]

Hey everyone, thinking of buying a wetsaw nd was wondering if there is any desent ones for around £1oo??

As a new new am not flat out doing jobs as ai am still doing my nvq!!

Thanks for your help!!!

 

[DHTiling]

Try this one from tradetiler........

Plasplugs Mastertiler DWW180

• Cast alloy deck (with lifetime warantee)
• 180 mm diameter (22.2mm bore) wheel included
• 27 mm cut depth
• Height adjustable wheel guard
• Flip-up guide plate for 45° mitres
• Unique Hi-Torque 650 watt motor
• Carry handle
• Unique water re-circulation system
• Cutting guide - use left or right
• Click-grip calliper locks

weight 16 Kg inc packaging


TradeTiler.Ltd Wet Saws

 

[tile55]

I agree, good choice Dave, good product for a reasonable price.

 

[westcoast tiler]

nice one this is the one I use for kitchens and small bathroom jobs.
no water runs over the sides. :smash:

 

[beanz]

nice one this is the one I use for kitchens and small bathroom jobs.

Just out of curiosity, what do you use for larger jobs?

no water runs over the sides. :smash:

provided you keep the guard as low as possible.

 

[Olz]

Yep its a good saw, i use mine more than the rubi.

 

[Grace'sDad]

Also it's £79.99 inc vat at B&Q (sorry tradetiler!) but watch out as they seem to sell a lot with wobbly spindles. Best to ask to demo one before you buy.
B&Q are getting notorious for refusing to exchange/refund trade purchases (even though it says "professional" on the box!)

 

[westcoast tiler]

I have the big bad boy DEWALT the cream of the crop :20:

what do you use?

 

[Grace'sDad]

I have a Mastertiler (as above) for small everyday stuff, and a Montolit Brooklyn for the big stuff. Oh, and a ikkle grinder for really small jobs / stone finishing.

 

[beanz]

I have the MasterTiler too, not done anything big enough to need anything else yet (new boy). Just curious, i like to know what my options are for future reference hehe!

 

[westcoast tiler]

The Dewalt is a big machine and good for slate, marble etc.
it takes up a lot of room in your van but I think it is good
value for money because it has a sliding table and it can
be use as a chop saw whitch is good for taking complete
holes out out of tiles eg elec sockets if using large tiles
in kitchens.

where as a lot of the big wet cutters can only run and
not chop.

hope to be of help

 

[medlar]

heres a cheap little wet cutter,never used 1 but my mate has had his (although this is the latest version) for about 3 years and found no problems with it

Erbauer ERB180C Tile Cutter Chrome Top 230V

Convenient-sized, chromium-coated table and waterproof switch. Table is tiltable for various applications.

• Induction Motor
• Max. Cut Depth 35mm
• Diamond Blade
• Work-Piece Clamp
• Blade Brake
• Parallel Fence
• Mitre Guide
• Steel Table

ERB180C, parallel guide, 45° mitre gauge, water tank, blade.

 

[doug boardley]

got a spare dw 200 (the one without the legs) it's a 240v so I don't use it now, if you're up in lakes at all for £100 it's yours!

 

[White Room]

Good price Doug:santa_cheesy:

 

[doug boardley]

got it when I was mainly doing domestic work where 240v isn't a problem, with hindsight I should have got my 110v and a transformer first!

 

[Grace'sDad]

Doug, I may well have it. Will PM you later this evening. Thanks!

 

[cornish_crofter]

I wish some of these bargains would work their way down to Cornwall for me.

Just seen Mr Spoons cutter go for £5.50!!!

 

[johnnyp]

Hello All,
I had a small 'plasplug' wet cutter and my real moan was measurements were poor,also adjustment bar clips were weak. I replaced it due to frustration!!!!
Bought a 'Rexon' TC1150AL , 720watt good power and clean cut. I know it's a cheapy but VERY functional. Good extention table, to both sides, great adjust scale /bar.
Had it couple of years ,done a fair few jobs with it.
Screwfix do them for about£56 - 58 , if you break it Screwfix change it!! can't be TOO bad!
GOOD LUCK
Johnnyp