need advice please, tiling balcony

[White Room]

Id have a word with the roofer mate let him know hes a roofer not a tiler... How can u be expected to put a solid flat tile onto a curved surface, surely you discussed the area to be tiled with the customer beforehand?

You can if you cut strips of the tile....

 

[Mr Tiler]

But then that would leave cut edges (only ever acceptable in an envelope) aparently

 

[The Legend; Phil Hobson RIP]

You can if you cut strips of the tile....

Exactly Mark, I have done this many times for many reasons.

You can tile a football, a space shuttle, or anything, if you know what you are doing.

 

[The Legend; Phil Hobson RIP]

But then that would leave cut edges (only ever acceptable in an envelope) aparently

No Ash mate,when cut correctly you should not know which side is cut and which side is a manufactures edge.

Quick rub with a diamond pad, after a cut on a quality wet cutter, no probs.

 

[White Room]

No, it's a concave shape so a good wet cutter should leave clean cuts...

 

[The D]

But then that would leave cut edges (only ever acceptable in an envelope) aparently

if you say so m8

 

[Andy Allen]

Exactly Mark, I have done this many times for many reasons.

You can tile a football, a space shuttle, or anything, if you know what you are doing.

its not rocket science, is it Phil...

i'll get me coat..lol

 

[The Legend; Phil Hobson RIP]

its not rocket science, is it Phil...

i'll get me coat..lol

I walked right into that Andy lol, nice one.

 

[Mr Tiler]

No Ash mate,when cut correctly you should not know which side is cut and which side is a manufactures edge.

Quick rub with a diamond pad, after a cut on a quality wet cutter, no probs.

oh rite lol my bad mate, I knew it could be done with polished porc didn't think it could be done with any tile though 😉