We have our bathroom renovated and contracted an experienced tiler to do the tiling job. We removed 2 of the tiles after more than 48 hours as they had misaligned corners. We noticed there seem to be limited area were the tile BAL ready mixed adhesive has actually bonded to the green...
New to the forum and my first post on this after doing a bit of searching. I'd be interested to know your thoughts/experience of fitting BAL Board or Hardiebacker under the shower tray. The reason I ask is that with the build-up i'm looking at, if I installed the shower tray on the ply...
For those who are interested the new football season has started.
State your club and watch their season progress.
From Premier league to ..... Sunday morning park games - whatever you follow.
Time's Ran Out
Hi. I have a shower area to be tiled. Tiles roughly 400mm x 200mm with bal adhesives and grouts. Walls prepped with moisture board and tanked. It is approximately 6.5m2. The job is in Ealing. If anyone is keen please contact me.
hi all has any one used this decoupling mat by BAL yet. Was talking to there REP today and am thinking about using it on a job which is getting an anhydrite screed.
there seam to be alot of advantages to using this product but need to know your views
In search of porcelanosa bali antracita tile 44.3 x 44.3. One box ideally two. I have check with porcelanosa and it is discontinued and they have none in stock. We are hoping to get some work done in our kitchen and need only 6-8 tiles if we can’t get them then we won’t be doing the work as it...
Much as I can'knock Bal for the speed in which they sent out these grout swatches(I only rang up yesterday morning.
I only wanted 1! Not 5!
On a sidenote surely there must be more colour variation than this?
I was looking a the two new BAL Flexbone products yesterday, and nearly made a mistake as to which way round the Flexbone 2Easy should be laid.
Flexbone Varied is the product on the left, this should be fixed with adhesive with the fleece on the underside.
However, the Flexbone 2Easy MUST be...
I’m about to tank Hardie Backer cement boards using the BAL WP1 waterproofing kit. I’m a bit confused with the Prime APD. Should I just paint this straight on, undiluted, or should I be diluting at all? If I do need to dilute, what proportions?
I’ve had some stellar advice from these forums in getting some split face stone tiles installed on my walls safely and correctly, and based on the advice I insisted they were installed on marmox boards rather than the existing plasterboard.
I supplied the boards, the washers, the...
Any opinions on either of these? I’m used to tilemaster setaflex but my local tile shop has just taken on ultra instead. But I’ve been looking at the rapid flex one as well. Anything to take on board before testing either?
Please help, we have used Bal Micromax inspirations two on stone flooring and it’s got around the edges of the stone and we are struggling to remove it. Because the stone is pitted it looks awful and water and wire wool helps but just seems to smear it around. We are getting nowhere fast and...
Hi, I want to tile onto WEDI type backing board with mosaic tiles 30x27. The location is the bathroom but not around the bath area. What adhesive do you recommend? Bal Green Star, Blue Star or White Star?
sorry I know there are already many different threads on what adhesive to use for quartz tiles but I’m still a bit nervous about what advise to go with . The tiles are from tile mountain who say to use Mapei Granirapid , but I can’t get hold of it in time for when I need it . Bal technical say...