As the title suggests, normally with a curved wet room screen I would advise mosaics . But the customer wants the floor tiles running into the tray.
Has anyone any ideas how to do the cuts?
yes you can but it will require few cits from screen to drain. and it woildnt look good i think. as you will have 2 cuts on one side and 5-10 on other side.
cut a curve in a cardboard i one point it will be level in other it will be below level and you will have to compensate that with cuts.
I am looking for 1 wickes Mississippi grey tile - damaged 1 tile in my kitchen and they have been discontinued 😭😭 looked everywhere online - wondered if anyone could help😞
https://www.tilersforums.com/threads/shower-bath-tiling-preparation-plaster-and-wooden-windowsill.83462/#gsc.tab=0
There was some heated argument in the above thread! I don't have much...
Hello,
I am a noob trying to tile our shower. Since the old tiles were taken off, some of that wall material has been taken off as well, so everything had to be smoothed. After smoothing with some...
This is the Brilliant Tiling Advice Provided and Peer-Reviewed via 1000’s of Tilers Discussion Thread
How do you know Tiling Advice is Trusted? When its peer reviewed and treated scientifically...
This is the A Friend of ours, UK Tiling Forum, is worth a mention for sure Discussion Thread
We have this Tile Blog here, and a few other websites lets say. We will be adding to the blog during...