Discuss 20mm Thick external porcelain, best adhesives and expansion joints in the Tile Adhesive / Grout Advice area at TilersForums.com.

Reaction score
8
Im about to embark on an external 20mm thick porcelain project 600x900's , I plan to use Bio gel no limits for laying has anyone used this before pros / cons

I also plan to brace the expansion joints in the screed with a strip of uncoupling membrane to act as a movement joint, thoughts ?

TIA
 
J

J Sid

S1 adhesive would be fine
Movement joints ever 3 Mt's I believe for external plus if there is an expansion joint in screed follow it through tiles.
Check the falls are correct
 
O

Old Mod

I also plan to brace the expansion joints in the screed with a strip of uncoupling membrane to act as a movement joint, thoughts ?

TIA

Sorry if I’m misreading this,
Do you mean you’re covering the expansion joints with a strip of matting?

As Julian says above, if there are joints in the screed, then there should be the same joint in the tiles.

Expansion joints should not be covered.
 
Reaction score
8
I get that expansion joints should be followed through the screed to the tile.
But I cannot find a 20mm deep stainless steel external grade movement joint.

Does anyone know where I could purchase one?
 

Tile Fix Direct

TF
TF Official Sponsor
Reaction score
153
Kerakoll have a full system for external patios, I have attached a data sheet. This system makes expansion joints very easy. Basically lay a traditional sharp sand and cement screed over your sub base and include expansion joints, apply Kerakoll Green Pro decoupling, but do not cover expansion, tile but grout nearest joint to expansion with silicone. All items available from TileFix;

Call Karl at Kerakoll for more info 07799 70‬3378
 

Attachments

  • System_C8_update.pdf
    1.8 MB · Views: 25
Reaction score
71
I get that expansion joints should be followed through the screed to the tile.
But I cannot find a 20mm deep stainless steel external grade movement joint.

Does anyone know where I could purchase one?

Dural do stainless steel movement joints up to 50mm deep. Give them a call to find a local stockist.
 

Reply to 20mm Thick external porcelain, best adhesives and expansion joints in the Tile Adhesive / Grout Advice area at TilersForums.com

Or checkout our tile courses and training forum or the Tile Blog / Latest Blog Posts

There are similar tiling threads here

Good morning all. After a little advice. I'll post pictures a bit later. However.... The...
Replies
6
Views
677
I had a small leak in the main water line before the stop tap in my 1950s house. The copper pipe...
Replies
1
Views
534
The trustpilot reviews for tilers-world are excellent, but there's not a huge number of them...
Replies
3
Views
882
    • Like
Bathroom floor. I would be grateful for advice on how to prepare my bathroom sub floor ready for...
Replies
1
Views
348
Hi all. Just wanting some advice and wondering what the pros in here are using nowadays for...
Replies
2
Views
452
This website is hosted and managed by www.untoldmedia.co.uk. Creating content since 2001.
Please visit our sponsor websites, they keep the forum free to use!
Tile Contractor Forum. The useful tile contractor website.

Replies you've not seen

New Tiling Questions

UK Tiling Forum Stats

Threads
67,342
Messages
881,162
Members
9,534
Latest member
Lowpaul22
Top