Discuss Travertine : can/should it be laid flat? in the Specialist Tile -Stone, Porcelain, Glass area at TilersForums.com.

A

AllyCa

I've had a travertine floor fitted in my new kitchen. Many of the tiles are flat and level against each other with nice light grouting between. But several have a significant difference between the levels, so you can see and feel the side of the tile. When you stand at the kitchen door and look over the whole floor you don't only see the grouting between the tiles - there are several spots where it's dark because you're looking at the side of the tile. The fitter says this is normal/to be expected with natural stone tiles like this. Am I being too fussy? Would really appreciate an idea of what is best (or even, acceptable) practice when it comes to the leveling of a natural stone floor. And what would be the solution to get it looking right, if this isn't it...
 
T

Tile Shop

Are you able to provide images?

I would say they need to be flat, but a height difference of 1mm is allowed by British Standards for a grout width of 6mm or less. (2mm for over 6mm width)

If the tiles are Honed and filled, they should be manufactured to be of a uniform thickness, so a difference of height may then have been caused by inconsistent adhesive beds, or an unlevel floor (which should have been fixed before laying anything).

If the tiles are tumbled Travertine, there may be a very slight difference in thickness's, but this can normally be overcome by adjusting the bed depth or grading the tiles before fixing.
 
A

AllyCa

Are you able to provide images?

I would say they need to be flat, but a height difference of 1mm is allowed by British Standards for a grout width of 6mm or less. (2mm for over 6mm width)

If the tiles are Honed and filled, they should be manufactured to be of a uniform thickness, so a difference of height may then have been caused by inconsistent adhesive beds, or an unlevel floor (which should have been fixed before laying anything).

If the tiles are tumbled Travertine, there may be a very slight difference in thickness's, but this can normally be overcome by adjusting the bed depth or grading the tiles before fixing.

Thank you so much for this. It is filled and honed Travertine, from Topps Tiles. I've attached some photos and would be interested in your thoughts. Presumably the British Standards allowance is for health & safety (eg trip hazard) rather than what looks right aesthetically?
 
A

AllyCa

Here is the first image, more to follow

Image-1.jpg
 

Reply to Travertine : can/should it be laid flat? in the Specialist Tile -Stone, Porcelain, Glass area at TilersForums.com

Subscribe to Tilers Forums

There are similar tiling threads here

Hi All Had a panic when we had to rip out some of our floor tiles after a plumbing leak...
Replies
0
Views
294
Hi. Hoping you al. Can help me. I have an issue where I had a bathroom built and a shower...
Replies
8
Views
956
    • Like
Hi, 1200 wide tray and tiling shower enclosure recess with metro tiles where the 1200 wide...
Replies
10
Views
691
Hi there Homeowner here who recently had my kitchen tiled by a professional tiler. We’ve been...
Replies
3
Views
2K
Hi all, I've laid some Arditex NA over the kitchen floor area (not under cabinets. The area is...
Replies
3
Views
2K

Tile Buying Popular Threads

Advertisement

Thread Information

Title
Travertine : can/should it be laid flat?
Prefix
N/A
Forum
Specialist Tile -Stone, Porcelain, Glass
Start date
Last reply date
Replies
40

Which tile adhesive brand did you use most this year?

  • Palace

    Votes: 5 5.0%
  • Kerakoll

    Votes: 8 8.0%
  • Ardex

    Votes: 6 6.0%
  • Mapei

    Votes: 24 24.0%
  • Ultra Tile

    Votes: 14 14.0%
  • BAL

    Votes: 28 28.0%
  • Wedi

    Votes: 3 3.0%
  • Benfer

    Votes: 2 2.0%
  • Tilemaster /Kelmore

    Votes: 19 19.0%
  • Weber

    Votes: 18 18.0%
  • Other (any other brand not listed)

    Votes: 11 11.0%
  • Nicobond

    Votes: 5 5.0%
  • Norcros

    Votes: 3 3.0%
Top