Tiling anything nice in September.

working on some high spec houses atm nothing but wet rooms in them. Tanking tiling the lot love it lol hope its all good for you lot on here too! 😉
 
db36fb13be1a2f32abac279176f083bd_zpscakbqaet.jpg


This lot , 275m2 of modular on ground floor and level 2, and the 4 bathrooms adding to around 400m2 in total ! ;-)
 
looks like a bussy month again priced up 5 jobs in the last couple of days. got 3 emails to confirm go aheads.
one is 2 bathrooms fully tiled and the whole house 3bedrooms living room hall and kitchen dining room all to do in karndean vinyl
the 2bathroom in jura limestone
it pays to diversify lol🙂
 
I've just done a hallway over the weekend in 600x600x20mm porcelain.
FB_IMG_1441564452636.jpg

On going project with a bit of this......
100_1339-2.JPG


Bit of that......
DSC_0293.JPG

Got a large area of travertine starting toward the end of the month too
 
Last edited by a moderator:
What you gonna use on external asphalt? I did one years ago and nobody would commit to a spec.

Well Paul @AD Ceramics spoke with Glynn from Tilemaster this morning and following a very interesting and informative conversation, this is the outcome.
Firstly there are 4 grades of asphalt! (Who knew? Haha not me that's apparent!)
So providing it's grade A or 1 flooring asphalt, (however it's classified)
My original method was correct, apart from replacing the primeplus slurry with their new Primeplus Grip!
With one addition, because there will be exposed edges around some of the tiles, won't bore u! The use of Ardex WPJ or Mapei Adesilex PG4 to seal any exposed edges from moisture ingress! (Makes sense)
This method has also been approved by Tilemasters Chemist, just this morning!
So a big thanks to @Glynn for such a precise solution to the problem and for even suggesting the use of other manufacturers products (which he named) to give a complete solution to the problem! *tips hat!*

And thank you Paul, @Dave & @Plan Tec Tiling 😉
 
Well Paul @AD Ceramics spoke with Glynn from Tilemaster this morning and following a very interesting and informative conversation, this is the outcome.
Firstly there are 4 grades of asphalt! (Who knew? Haha not me that's apparent!)
So providing it's grade A or 1 flooring asphalt, (however it's classified)
My original method was correct, apart from replacing the primeplus slurry with their new Primeplus Grip!
With one addition, because there will be exposed edges around some of the tiles, won't bore u! The use of Ardex WPJ or Mapei Adesilex PG4 to seal any exposed edges from moisture ingress! (Makes sense)
This method has also been approved by Tilemasters Chemist, just this morning!
So a big thanks to @Glynn for such a precise solution to the problem and for even suggesting the use of other manufacturers products (which he named) to give a complete solution to the problem! *tips hat!*

And thank you Paul, @Dave & @Plan Tec Tiling 😉

That's good Marc, I knew there was different grades and understood the standard flooring grade was ok to tile on, the one I was doing on the balcony in question was very oily/greasy and that's the only reason I question the procedure.
Have they arises you which grade you are tiling on? Or is that what you are saying its flooring grade.
We learn every day thanks for info.
 
That's good Marc, I knew there was different grades and understood the standard flooring grade was ok to tile on, the one I was doing on the balcony in question was very oily/greasy and that's the only reason I question the procedure.
Have they arises you which grade you are tiling on? Or is that what you are saying its flooring grade.
We learn every day thanks for info.

No no thank u! Haha
I'm still waiting for architect to confirm grade.
But at least my end is sorted!
There's a little part of me hopes that the asphalt isn't up to standard! Haha
Don't fancy leaping across roof tops, I'm not bloody Dick Van Dyke! Haha
 
No no thank u! Haha
I'm still waiting for architect to confirm grade.
But at least my end is sorted!
There's a little part of me hopes that the asphalt isn't up to standard! Haha
Don't fancy leaping across roof tops, I'm not bloody Dick Van Dyke! Haha
Worth considering a harness or what?
 
It's not actually as bad as I'm making out
(it's the drama queen in me!) haha
It's a way of expressing my actual wishes, without saying what I really want to! Haha see said it anyway, kind of! Haha 😀

Even tho it's five stories up, six including roof, it's effectively flat with ladder access to each apartment.
If it goes ahead I'll show u the view! 😱
It'll be squeezing me and my kit down ladder that'll be fun! 😀
I may have daytime access to one or two, but in the main they are London crash pads, so there's rarely anyone home!
 
It's not actually as bad as I'm making out
(it's the drama queen in me!) haha
It's a way of expressing my actual wishes, without saying what I really want to! Haha see said it anyway, kind of! Haha 😀

Even tho it's five stories up, six including roof, it's effectively flat with ladder access to each apartment.
If it goes ahead I'll show u the view! 😱
It'll be squeezing me and my kit down ladder that'll be fun! 😀
I may have daytime access to one or two, but in the main they are London crash pads, so there's rarely anyone home!

You'll gave to rig up some kinda pulley Marc. What gear you gotta get up there?
 
You'll gave to rig up some kinda pulley Marc. What gear you gotta get up there?

Well there's a lift to top floor but one, then two flights of stairs to top flat where architects office is.
So it's thro his cramped office, very cramped, out on to his terrace, then up skinny ladder to access other apartments, then down ladder again! 😀
Now being ex navy, I always go down ladders facing outwards, like going down stairs, that's just what u do and I'm used to it! But never with a tx700N under my arm! Hahaha
A pullee Ali? Why u offering to pull my gear up for me? Hahaha
Oh u do t mean that kinda pullee do u, as in employee? Hehe 😀
U mean block and tackle! Haha
 
WP_20150907_17_27_52_Pro.jpg WP_20150907_17_28_28_Pro.jpg WP_20150907_17_27_45_Pro.jpg
Just finished this little one today
Not bad considering I only had an angle grinder to cut these tiles
WP_20150907_17_28_12_Pro.jpg WP_20150907_17_28_02_Pro.jpg
 
Last edited by a moderator:
Well there's a lift to top floor but one, then two flights of stairs to top flat where architects office is.
So it's thro his cramped office, very cramped, out on to his terrace, then up skinny ladder to access other apartments, then down ladder again! 😀
Now being ex navy, I always go down ladders facing outwards, like going down stairs, that's just what u do and I'm used to it! But never with a tx700N under my arm! Hahaha
A pullee Ali? Why u offering to pull my gear up for me? Hahaha
Oh u do t mean that kinda pullee do u, as in employee? Hehe 😀
U mean block and tackle! Haha
He means apprentice, costs barley snything and will gladly run up and down the ladder 😉 lol
 
Every single one ,I've only ts60 plus and its terrible for porcelain.I'm investing in a sigma this week. 🙁
 
Well there's a lift to top floor but one, then two flights of stairs to top flat where architects office is.
So it's thro his cramped office, very cramped, out on to his terrace, then up skinny ladder to access other apartments, then down ladder again! 😀
Now being ex navy, I always go down ladders facing outwards, like going down stairs, that's just what u do and I'm used to it! But never with a tx700N under my arm! Hahaha
A pullee Ali? Why u offering to pull my gear up for me? Hahaha
Oh u do t mean that kinda pullee do u, as in employee? Hehe 😀
U mean block and tackle! Haha

Mate the way my week(s) are going at the moment I'd lacky up and down ladders for you all day long for a break!
Things are crazy busy at the minute. Coupled with van problems and Em due anytime now, my stress levels are tinkering!
Head down and drive on!!
 
Mate the way my week(s) are going at the moment I'd lacky up and down ladders for you all day long for a break!
Things are crazy busy at the minute. Coupled with van problems and Em due anytime now, my stress levels are tinkering!
Head down and drive on!!
Haha least u get me! Haha
I know mate, that's half the reason I said it! Haha
God I bet ur bloody murder at the moment! Haha 😉
 
Back to bricks,re boarded ceiling skimmed all new pipework wetdeck,tanking everything really.finished off with painting the ceiling and door today.haven't stopped to be honest lol
 

Advertisement

Thread Information

Title
Tiling anything nice in September.
Prefix
N/A
Forum
Australia Tiling Forum
Start date
Last reply date
Replies
60

Thread Tags

Advertisement

Tilers Forums Official Sponsors

Thread statistics

Created
Dave,
Last reply from
peteablard,
Replies
60
Views
7,416

Thread statistics

Created
Dave,
Last reply from
peteablard,
Replies
60
Views
7,416
Back