Tiling Tool Suppliers

We recommend a couple of the best tiling tool suppliers, Pro Tiler Tools and Trade Tiler

Both supply the best tiling tool supplies, cutter makes, tile trims etc.

Discuss Thin Multi Tool Blade in the Tiling Tools area at TilersForums.com.

F

Flintstone

Big time, I avoid it. Although yesterday I went to re grout a 35m polished porc floor for a regular customer, he said grout was failing and the manufacturers had been out etc. I lifted a tile, turns out, was an anhydrite screed and they didn't realise when tiling it, was agreed concrete was going in before hand. Didn't end up doing the re grout!
 
S

Stef

Big time, I avoid it. Although yesterday I went to re grout a 35m polished porc floor for a regular customer, he said grout was failing and the manufacturers had been out etc. I lifted a tile, turns out, was an anhydrite screed and they didn't realise when tiling it, was agreed concrete was going in before hand. Didn't end up doing the re grout!
How easy did the tile come up?
I tested tiles on a Gyvlon screed before, primed & un primed using a cement based addy & they came up as clean as a whistle.
 
S

Stef

I'm gonna book it in to take them all up and re do it. Is it right that tilemaster anhydrite fix can go straight on the screed without the need for sanding? Just 3 coats of primer
You must sand the laitance off of the screed.
The layer that's stuck to the adhesive on the bottom of the tile is probably the laitance from the screed.
If your going with Anhyfix then use prime plus with it but mix it to a 5/1 as I've had it skin on me before & after testing I found the 5/1 the best for priming.
Give it just the one coat & tile.
Anhyfix is a great adhesive.
How long has the screed been down?
I would test it 1st to get a moisture reading to make sure it is dry.
 
F

Flintstone

It has been down a year, it was left a calculated amount of time per mm before tiling. Ile be speaking to tile master technical but I have it on good authority that you don't need to sand it with the current formula, 12 months ago it was required but now tilemaster and bal have got it sorted. So I'm told. As for the primer dilution, I'm told it is a specific rate but I'm not sure what.
 

Reply to Thin Multi Tool Blade in the Tiling Tools area at TilersForums.com

Subscribe to Tilers Forums

There are similar tiling threads here

I’ve got a job using marble geometric mosaics about 10 mm thick. I’ve tried several blades to...
Replies
3
Views
840
I need advice on score and snap cutting of large porcelain tiles, lets say, over 1000 mm long...
Replies
0
Views
413
Hi, Looking for advice mainly on how much adhesive I should remove from between the tiles in a...
Replies
1
Views
1K
    • Like
Hello, I did some reading here and there, but the opinions seem to diverge at some point and I...
Replies
2
Views
1K
Hi All Had a panic when we had to rip out some of our floor tiles after a plumbing leak...
Replies
0
Views
294

Tiling Tool Popular Threads

Advertisement

Thread Information

Title
Thin Multi Tool Blade
Prefix
N/A
Forum
Tiling Tools
Start date
Last reply date
Replies
18

Tiling Tools

Find the cheapest price for both professional and DIY wall and floor tiling tools in the UK. Brands such as Rubi, Genesis, Fein, Karl Dahm, isomat, Schluter, Tilemaster and more.

Which tile adhesive brand did you use most this year?

  • Palace

    Votes: 5 5.0%
  • Kerakoll

    Votes: 8 8.0%
  • Ardex

    Votes: 6 6.0%
  • Mapei

    Votes: 24 24.0%
  • Ultra Tile

    Votes: 14 14.0%
  • BAL

    Votes: 28 28.0%
  • Wedi

    Votes: 3 3.0%
  • Benfer

    Votes: 2 2.0%
  • Tilemaster /Kelmore

    Votes: 19 19.0%
  • Weber

    Votes: 18 18.0%
  • Other (any other brand not listed)

    Votes: 11 11.0%
  • Nicobond

    Votes: 5 5.0%
  • Norcros

    Votes: 3 3.0%

You're browsing the Tiling Tools category on TilersForums.com. Find the correct trowels to use with which type of tiling. Find advice on lash clips and levelling systems and more. Our rubi tiling tools and Tile cutters. Sigma tiling tool manufacturer and much much more.

Top