D
Doing My Best
Many thanks to everyone on this forum - you're complete stars for sharing your knowledge like you do.
I'm doing a big diy project with a family bathroom, en-suite and a cloakroom. Bathroom and en-suite both floors and walls in lower grade tumbled trav, from 100mm square up to 400mm square. Level access shower areas. All surfaces are 12mm Hardie backer board, surfaces sealed with SBR or equivalent, and fully tanked around showers.
I'm a regular reader and almost all my questions have been answered already in threads. However I've got a couple of specific questions which I'll drop into the appropriate forums now. Thanks in advance for any replies!
I'm doing a big diy project with a family bathroom, en-suite and a cloakroom. Bathroom and en-suite both floors and walls in lower grade tumbled trav, from 100mm square up to 400mm square. Level access shower areas. All surfaces are 12mm Hardie backer board, surfaces sealed with SBR or equivalent, and fully tanked around showers.
I'm a regular reader and almost all my questions have been answered already in threads. However I've got a couple of specific questions which I'll drop into the appropriate forums now. Thanks in advance for any replies!
