most suitable adhesive for plywood floor

[evertonl36]

just picked a job up in a that consists of a bathroom wall and floors to be tiled, floor consisting of 2m tiles to go on plywood what would be the best adhesive to use?

 

[Gazzer]

just picked a job up in a that consists of a bathroom wall and floors to be tiled, floor consisting of 2m tiles to go on plywood what would be the best adhesive to use?

i would either go with a 2 part flexi adhesive or Mapei Keraflex maxi.....but i would still over board with either Hardibacker or No More Ply.

 

[heavytrevy]

I agree, i would sheet with 6 mm cement board and go from there.

Trev

i would either go with a 2 part flexi adhesive or Mapei Keraflex maxi.....but i would still over board with either Hardibacker or No More Ply.

 

[dagger]

if the ply is stable you can use keraquick and latex plus.

 

[TheFunkyMonkey]

I'm about to do similar.
Customer has just decided to have travertine and ufh at the last min. Its a new house but the floor boards are atrocious so i'm intending to replace with 18mm ply. I don't want to raise the height too much as ufh will add a few extra mm. It's going to be a warmup kit, so quite thin.
What is the advantage of cement board and where would it in in relation to the cable?
Also, what self level should I use over the cable?

 

[beanz]

I usually just use a flexi rapid set on Ply.... :smilewinkgrin: