Advise on adhesive and grout for a commercial steam room please - TilersForums.com

[JON HUME]

Hi all,
Can you please give me your opinion on the best adhesive and grout to use in a commercial steam room as I have to repair some mosaics and reroute the area?
Any experiences of doing such a job would be greatly appreciated.
Thanks
Jon

 

[Tile seller]

An epoxy grout would be good.

 

[JON HUME]

Aren’t they a pain to work with? No problem experience if this but just read it

 

[One Day]

For a commercial steam room it has to be epoxy grout. Also your adhesive (and grout to a degree) will depend on the substrate and the mosaics. Ie, fibreglass will need a different adhesive to wedi. Glass mosaic will need maybe a different adhesive to stone....

Cut corners in a steam room and it will not last...

 

[Time's Ran Out]

There’s some advice in there somewhere!