S
StevieBoy
Price?
Self Levelling Multi Line Laser
M
mr.tile
You can get the hilti at 400$ on ebay, free shipping!
My pls was 479$, It fits my laserjamb perfectly by the way🙂
My pls was 479$, It fits my laserjamb perfectly by the way🙂
Last edited by a moderator:
S
StevieBoy
I
Italy
Avevo STABILA, makita, ora con bosch
GLL 3-80 P Professional
un mondo completamente nuovo, sia per pavimenti e rivestimenti, Google tradotto
New
I STABILA, makita, now with Bosch
GLL 3-80 P Professional
a whole new world, both for floors and walls, Google translated
GLL 3-80 P Professional
un mondo completamente nuovo, sia per pavimenti e rivestimenti, Google tradotto
New
I STABILA, makita, now with Bosch
GLL 3-80 P Professional
a whole new world, both for floors and walls, Google translated
Last edited by a moderator:
C
ChiversTiling
I use a Bosch GTL3 Tile Laser, good bit of kit
I
Italy
in Italy we do not use more ' to 45th floors 🙂
Two-Trowels
TF
I have the Leica Lino L2+, proper bit of kit.
Looks good value now at around £180 - does it do everything you need - like setting up for wall and floor tiling? Do you use it to make sure battens are level for example or not use them and start from the ground up?
Two-Trowels
TF
Paid £165 for mine Leica Lino L2+ Cross Line Laser - Tool Britannia
Use it for pretty much anything to do with layout etc.
Use it for pretty much anything to do with layout etc.
S
StevieBoy
That's an expensive one matey.
W
White Room
I paid more than that a couple of years ago....😕 that included a tripod as well.
I agree. I've had this laser for a few years now. Perfect for steam rooms with curves and vaulted ceilings as well as everyday use.
H
hmtiling
It arrived but unfortunately no CE mark on it. It's from amazon but only for north American and Canadian markets. Therefore no warranty and it's going back!
I'll be paying £10 more for one with a warranty!
I'll be paying £10 more for one with a warranty!
Ordered the Dewalt DW089k from Howe Tools today at £229 and got a pole from FFX at £60.
Got a 100sq mtr flooring job in Jan going through 2 halls and multi rooms so might need it!
Got a 100sq mtr flooring job in Jan going through 2 halls and multi rooms so might need it!
H
hmtiling
Could you post a link for the pole please. Can't seem to find it. Cheers
I
Italy
DCE089D1G
Hi - I actually got the stabila one because it was way cheaper but looks like it is better!. Also cheapest around normally £70 odd.
Stabila 18238 LT30 - Telescopic Laser Pole 135-365cm
I
Italy
I can not understand.......
but the laser you use it only for walls and level floors fund ?.
because you have these you can not do the squaring of a floor.
when I start tile floor, in two minutes I know if the four sides of the room are 90 ° and thus change the start. or if the corridor is a team with a room where the start, then the sound of the receiver placed on the ground will make miracles .....
with laser I saw above (Part 1) you can only project to a maximum of 1 line in the ground, of course the cost of my bosch gll3 is high, but much recovery time.
I hope you understand what I have written, and I apologize if maybe I'm wrong. but I got cross laser Hilti, Makita, rubi and stabila before we get to that Bosch 🙂
but the laser you use it only for walls and level floors fund ?.
because you have these you can not do the squaring of a floor.
when I start tile floor, in two minutes I know if the four sides of the room are 90 ° and thus change the start. or if the corridor is a team with a room where the start, then the sound of the receiver placed on the ground will make miracles .....
with laser I saw above (Part 1) you can only project to a maximum of 1 line in the ground, of course the cost of my bosch gll3 is high, but much recovery time.
I hope you understand what I have written, and I apologize if maybe I'm wrong. but I got cross laser Hilti, Makita, rubi and stabila before we get to that Bosch 🙂
Hi Antonio - my laser is the multiline version - cross plus another vertical so its fine - similar to your Bosch i think but cheaper ! DW089k not the one you show .
I
Italy
@highlandtiler.Avevo STABILA, makita, ora con bosch
GLL 3-80 P Professional
un mondo completamente nuovo, sia per pavimenti e rivestimenti, Google tradotto
New
I STABILA, makita, now with Bosch
GLL 3-80 P Professional
a whole new world, both for floors and walls, Google translated
we fail to understand.
your laser does not rays is 3 to 360 °.
Your laser is ok to lay tiles on walls.
if you need to do the floor can check the squareness of the room?
I do not think 🙂
I
Italy
L
lizzardtong
Nice piece of kit but the price tag on it 450-500£
I
Italy
yes, but I use it every day for floors and walls.
and I guarantee that the floors save much time and work perfect.
450/500 € only the laser, then add easel and receiver (very useful) another 200 €
Indeed , and it seems to be a rip off of the Bosch GLL 2 / 3 P , which uses conical prisms to give 360 rather than rotary. Also ( and this is why I opted for the Bosch in the first place ) the Dewalt is:
accurate up to +/- 0.3mm/m
The Bosch is accurate up to +/- 0.2mm/m
Just Saying.
Diggy 😀😛
I
Italy
There are similar tiling threads here
Featured Threads
-
- F
- W
-
- I
-
-
-
-