B
Billski
The ply now looks very dark, that's from the adhesive.
Discuss Weber Set Trade S1, real problems! in the Tile Adhesive / Grout Advice area at TilersForums.com.
Is that right?!150mm on floor and 300mm on walls need screws(BS)
Apparently doesnt need the surface priming.I know adhesive companies have been struggling with the different types of ply on the market and the variation on what you ask for and what you get. I would reckon Webber will come back with it hasn't been primed correctly.
Is that right?!
Apparently doesnt need the surface priming.
And if you prime against the manufacturer recommendations they blame the fact you have primed it !!I would always advise priming with an acrylic based at 3:1 on ply with the grades that are out there now! Have seen this twice with different brands in the last six months and the answer has been sub standard ply whifh wpuld have been ok of primed correctly! Personally not a fan of these "no prime" adhesives available because of this!
Reply to Weber Set Trade S1, real problems! in the Tile Adhesive / Grout Advice area at TilersForums.com
Or checkout our tile courses and training forum or the Tile Blog / Latest Blog Posts